Academic year 2023 - 2024

•   Advanced Fire Fighting for Officers MO22O403-3001 04.03.2024-06.03.2024  1 credits  (MT22D-Å) +-
  Competence objectives of the study unit

  STCW-Code: Table A-III/1
  The student
  • has knowledge of fire prevention
  • is able to organise firefighting drills.
  • has knowledge of different types of fires and fire related chemistry.
  • has knowledge of firefighting systems.
  • gains knowledge of the measures to be taken in case of a fire, including fire affecting the oil system

  Prerequisites

  Basic Fire Fighting

  Content of the study unit

  • Fire-fighting theory
  • Advanced Fire Fighting Course for officers is realised according to the course plan of the Fire Training Unit of the Maritime Safety Training Centre. The course takes place at an STCW-audited fire training unit.

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  04.03.2024 - 06.03.2024

  Enrollment date range

  02.07.2023 - 14.02.2024

  • 1 credits

  Group(s)

  • MT22D-Å

  Teachers and responsibilities

  Virtual Deck 2

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Basic Electrics MO22O201-3002 22.04.2024-25.05.2024  1.5 credits  (MT23D-Å, ...) +-
  Competence objectives of the study unit

  STCW-Code: Table A-III/1
  Students:
  have an understanding of and are able to apply the basic principles of electrical engineering in their work.

  Prerequisites

  Physics 4

  Content of the study unit

  • D.C. Theory (direct current)
  • One- and three-phase alternating current theory with resistance, capacitor and inductance.
  • Series and parallel connections
  • Load distribution
  • Electrical measuring instruments, measurement methods
  • Reading Scheme
  • Laboration exercises/work

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  22.04.2024 - 25.05.2024

  Enrollment date range

  01.12.2023 - 21.01.2024

  • 1.5 credits

  Group(s)

  • MT23D-Å
  • MT22D-Å

  Teachers and responsibilities

  Kaj Rintanen

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Basic Finnish 1 MO22CG02-3002 04.09.2023-06.11.2023  3 credits  (MT23D-Å) +-
  Competence objectives of the study unit

  The student being a beginner
  • acquires the first basics of the Finnish language
  • learn to understand and use simple everyday language in everyday situations.

  Prerequisites

  None

  Content of the study unit

  • Introducing yourself, greeting
  • Studies, family, leisure
  • The alphabet, concepts of time, numerals
  • Food and drink, at the restaurant, in the shop
  • Verbs in the present tense, interrogatives
  • Basic forms of the noun
  • Sentence structures
  • Plural forms

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  04.09.2023 - 06.11.2023

  Enrollment date range

  15.06.2023 - 03.09.2023

  • 3 credits

  Group(s)

  • MT23D-Å

  Teachers and responsibilities

  Peter Björkroth

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Basic Fire Fighting MO22S15-3003 14.03.2024-15.03.2024  0.5 credits  (MT23D-Å) +-
  Competence objectives of the study unit

  The student familiarizes him-/herself with the fire-fighting equipment onboard, its operational aspects and areas of usage, and is able to perform common fire-fighting measures onboard the vessel in accordance with STCWCode: A-VI/1-2, A-III/5.

  Prerequisites

  Medical certificate

  Content of the study unit

  • Combustion theory
  • Flammable substances
  • Alarm systems
  • Fire-fighting appliances and equipment
  • Fire-fighting agents
  • Exercises
  • Basic Fire Fighting Course according to the course plan of the Fire Training Unit of the Maritime Safety Training Centre. The course Evaluation takes place at a STCW-audited fire training unit

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  14.03.2024 - 15.03.2024

  Enrollment date range

  02.12.2023 - 14.02.2024

  • 0.5 credits

  Group(s)

  • MT23D-Å

  Teachers and responsibilities

  Virtual Meriturva

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Basic Safety MO22S14-3002 25.03.2024-28.03.2024  0.75 credits  (MT23D-Å) +-
  Competence objectives of the study unit

  The student is provided with the basic safety skills required in the STCW-Convention from all persons who intend to work onboard a vessel, in accordance with STCW-Code:A-VI/1-1, A-VI/1-4 and A--III/5..

  Prerequisites

  Medical certificate

  Content of the study unit

  • Maritime safety in theory and practice, equipment, safety techniques ad appliances, safety responsibilities, organization, physical and psychological preparedness, authority requirements, rescuing methods and practical exercises, and regulations for preventing environmental damages

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  25.03.2024 - 28.03.2024

  Enrollment date range

  02.12.2023 - 14.02.2024

  • 0.75 credits

  Group(s)

  • MT23D-Å

  Teachers and responsibilities

  Virtual Meriturva

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Basic Swedish 1 MO22CG01-3002 29.01.2024-10.06.2024  3 credits  (MT23D-Å) +-
  Competence objectives of the study unit

  The student, being a beginner
  • acquires the first basics of the Swedish language
  • learn to understand and use simple everyday language in everyday situations.
  The course content and pace will be adapted to the learning ability of the students.

  Prerequisites

  None

  Content of the study unit

  • Introducing yourself, greeting, phrases
  • Studies, family, leisure
  • The alphabet, concepts of time, numerals
  • Food and drink, at the restaurant, in the shop
  • Telephone phrases
  • Verbs in the present tense, interrogatives
  • Nouns, definite and indefinite forms
  • Sentence structures, word order
  • Plural forms, the genitive, prepositions, pronouns
  Course book:
  • Svenska utifrån, lärobok och övningar del 1,
  • Swedish-English glossary
  • and other material handed out during the course.

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  29.01.2024 - 10.06.2024

  Enrollment date range

  02.12.2023 - 28.01.2024

  • 3 credits

  Group(s)

  • MT23D-Å

  Teachers and responsibilities

  Peter Björkroth

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Basic Swedish 1 MO22CG01-3003 29.01.2024-10.05.2024  3 credits  (MT23D-Å) +-
  Competence objectives of the study unit

  The student, being a beginner
  • acquires the first basics of the Swedish language
  • learn to understand and use simple everyday language in everyday situations.
  The course content and pace will be adapted to the learning ability of the students.

  Prerequisites

  None

  Content of the study unit

  • Introducing yourself, greeting, phrases
  • Studies, family, leisure
  • The alphabet, concepts of time, numerals
  • Food and drink, at the restaurant, in the shop
  • Telephone phrases
  • Verbs in the present tense, interrogatives
  • Nouns, definite and indefinite forms
  • Sentence structures, word order
  • Plural forms, the genitive, prepositions, pronouns
  Course book:
  • Svenska utifrån, lärobok och övningar del 1,
  • Swedish-English glossary
  • and other material handed out during the course.

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  29.01.2024 - 10.05.2024

  Enrollment date range

  02.12.2023 - 28.01.2024

  • 3 credits

  Group(s)

  • MT23D-Å

  Teachers and responsibilities

  Peter Björkroth

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Electronics and automation MO22O202-3002 11.09.2023-22.10.2023  3 credits  (MT22D-Å) +-
  Competence objectives of the study unit

  Student:
  • are knowledgeable in the working methods of basic components and circuits used to measure, regulate and control ship machinery.
  • should also be able to perform control measures and simpler troubleshooting of electrical and electronic equipment.

  Prerequisites

  Physics 4

  Content of the study unit

  • Passive components
  • Semiconductor Materials
  • Diodes
  • Transistor
  • Thyristor and diode rectifier
  • Logic circuits

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  11.09.2023 - 22.10.2023

  Enrollment date range

  15.06.2023 - 10.09.2023

  • 3 credits

  Group(s)

  • MT22D-Å

  Teachers and responsibilities

  Kaj Rintanen

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Energy Engineering Exercises MO22O305-3001 18.03.2024-03.05.2024  3 credits  (MT22D-Å) +-
  Competence objectives of the study unit

  STCW-Code: Table A-III/1
  Students:
  • are to perform practical exercises in operation and maintenance of the vessel diesel, separator, booster unit and ship boiler

  Prerequisites

  Ship diesel engine 1, marine engines, steamboiler and turbines

  Content of the study unit

  • Piston-, and lining overhaul on the ship's main engine
  • Measurement and determination of component condition
  • Adjustment of valves, etc.
  • Separator overhaul, explanation of the function
  • Operation and maintenance of the vessel boiler
  • Boiler Water samples
  • Use of special equipment and tools

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  Timing

  18.03.2024 - 03.05.2024

  Enrollment date range

  01.12.2023 - 17.03.2024

  • 3 credits

  Group(s)

  • MT22D-Å

  Teachers and responsibilities

  Bertel Henriksson

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Engine Measurement and Calculations MO20M109-3001 11.03.2024-30.05.2024  5 credits  (MT20D-Å) +-
  Competence objectives of the study unit

  STCW- Code: Table AIII/2
  
  The student:
  • gains advanced knowledge of the thermodynamics and mechanics of a diesel engine. Ability to independently perform calculations and dimensioning related to marine diesel engines.

  Prerequisites

  None

  Content of the study unit

  • Thermodynamics and mechanics of a diesel engine.
  • Calculations and dimensioning related to marine diesel engines.

  Further information

  The course can be conducted with cooperation with other universities of applied sciences (for instance Turku University of Applied Sciences) with corresponding scope, competences and contents.

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  11.03.2024 - 30.05.2024

  Enrollment date range

  01.12.2023 - 10.03.2024

  • 5 credits

  Group(s)

  • MT20D-Å

  Teachers and responsibilities

  Kaj Rintanen

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Campus

  Åbo, Hertig Johans parkgata 21

  Assessment scale

  H-5

•   Engine Measurement and Calculations MO22M107-3001 11.03.2024-30.05.2024  5 credits  (MT21D-Å) +-
  Competence objectives of the study unit

  STCW- Code: Table AIII/2
  
  The student:
  • gains advanced knowledge of the thermodynamics and mechanics of a diesel engine. Ability to independently perform calculations and dimensioning related to marine diesel engines.

  Prerequisites

  None

  Content of the study unit

  • Thermodynamics and mechanics of a diesel engine.
  • Calculations and dimensioning related to marine diesel engines.

  Further information

  The course can be conducted with cooperation with other universities of applied sciences (for instance Turku University of Applied Sciences) with corresponding scope, competences and contents.

  ---

  Person(s) in charge

  Kaj Rintanen

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  11.03.2024 - 30.05.2024

  Enrollment date range

  01.12.2023 - 12.11.2023

  • 5 credits

  Group(s)

  • MT21D-Å

  Teachers and responsibilities

  Kaj Rintanen

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Engine Room Simulation 3 MO22M301-3001 15.01.2024-01.03.2024  1.5 credits  (MT21D-Å) +-
  Competence objectives of the study unit

  STCW-Code:Table A-III/2:
  
  The student has practical knowledge of:
  • Start up and shut down main propulsion and auxiliary machinery, including associated systems
  • Operating limits of propulsion plant
  • The efficient operation, surveillance, performance assessment and maintaining safety of propulsion plant and auxiliary machinery
  • Functions and mechanism of automatic control for main engine
  • Functions and mechanism of automatic control for auxiliary machinery including but not limited to:
  .1 generator distribution systems
  .2 steam boilers
  .3 oil purifier
  .4 refrigeration system
  .5 pumping and piping systems
  .6 steering gear system
  .7 cargo-handling equipment and deck machinery

  Prerequisites

  Engine Measurement and Calculations, Thermodynamics and Refigerators, Mechanics and Strength of Materials, Manage Fuel, Lubrication and Ballast Operations, Control Engineering, PLC programming and Safety Devices

  Content of the study unit

  • Manage the operation of propulsion plant machinery
  • Plan and schedule operations
  • Operation, surveillance, performance assessment and maintaining safety of propulsion plant and auxiliary machinery
  • Manage fuel, lubrication and ballast operations

  ---

  Person(s) in charge

  Bertel Henriksson

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  15.01.2024 - 01.03.2024

  Enrollment date range

  01.12.2023 - 14.01.2024

  • 1.5 credits

  Group(s)

  • MT21D-Å

  Teachers and responsibilities

  Bertel Henriksson

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Engine Room Simulator 1 MO22O107-3001 22.01.2024-08.03.2024  1.5 credits  (MT22D-Å) +-
  Competence objectives of the study unit

  STCW-Code: Table A-III/1
  Students:
  • have basic knowledge of the ship's machinery systems and subsystems structure and function, as well as their role and influence in complete vessel construction.

  Prerequisites

  Internal Combustion Engines
  Steam Boilers and Turbines
  Ship Diesel Engine 1
  Marine Engines
  Energy Engineering Exercises
  Electrical Engineering
  Electronics

  Content of the study unit

  • Starting the normal operation of different systems
  • Vessel electricity generating and phasing
  • Main machinery
  • Propulsion system and power transmission
  • Other equipment
  • Internal communication

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  22.01.2024 - 08.03.2024

  Enrollment date range

  01.12.2023 - 21.01.2024

  • 1.5 credits

  Group(s)

  • MT22D-Å

  Teachers and responsibilities

  Bertel Henriksson

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Engine Room Simulator 2 MO22O306-3001 25.03.2024-03.05.2024  1.5 credits  (MT22D-Å) +-
  Competence objectives of the study unit

  STCW-Code:Table A-III/1
  Student:
  • has basic knowledge of the vessel's machinery system, the structure and function of subsystems/sections, as well as their role and impact/influence in complete ship construction.

  Prerequisites

  Engine Room Simulator 1

  Content of the study unit

  • Starting and operating of the ship's machinery
  • The propulsion resistance of the vessel
  • Constant, and combinator
  • E 0, periodically unmanned engine room
  • Alarm and monitoring systems
  • Communication between the Command Bridge and the ECR
  • Operational training

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  25.03.2024 - 03.05.2024

  Enrollment date range

  01.12.2023 - 24.03.2024

  • 1.5 credits

  Group(s)

  • MT22D-Å

  Teachers and responsibilities

  Bertel Henriksson

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   English 1 MO22S03-3002 13.11.2023-20.12.2023  1 credits  (MT23D-Å) +-
  Competence objectives of the study unit

  STCW-Code A-III/4-5
  The course introduces the student with Maritime English and its range of use.
  The student knows the most important vocabulary in connection with radio communication in distress situations and in routine radio traffic.

  Prerequisites

  None

  Content of the study unit

  Exercises in radio communication, the most important maritime vocabulary and reading of maritime-related texts.

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  13.11.2023 - 20.12.2023

  Enrollment date range

  15.06.2023 - 12.11.2023

  • 1 credits

  Group(s)

  • MT23D-Å

  Teachers and responsibilities

  Peter Björkroth

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   English 1 MO21S18GMC-3002 10.10.2023-30.12.2023  0.5 credits +-
  Competence objectives of the study unit

  STCW- Code: Table AIII/4-5
  The course introduces the student with Maritime English and its range of use.
  The student knows the most important vocabulary in connection with radio communication in distress situations and in routine radio traffic.

  Prerequisites

  None

  Content of the study unit

  Exercises in radio communication, the most important maritime vocabulary and reading of maritime-related texts.

  ---

  Person(s) in charge

  Tony Karlsson

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  10.10.2023 - 30.12.2023

  Enrollment date range

  10.09.2023 - 09.10.2023

  • 0.5 credits

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Campus

  Åbo, Hertig Johans parkgata 21

  Assessment scale

  H-5

•   English 2 (English ML E2 Maritime Business English) MO22CL04-3001 01.08.2023-31.12.2023  2 credits  (MT21D-Å) +-
  Competence objectives of the study unit

  The student has ability to perform administrative duties in English with the emphasis on maritime-related examples.

  Prerequisites

  Professional English 1

  Content of the study unit

  Material and duties in connection with the officers’ administrative duties. The course contents vary and can include areas such as business letters, cargo documents (e.g. B/L, M/R and C/P), personnel administration, shipping company annual reports, etc.

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  01.08.2023 - 31.12.2023

  Enrollment date range

  02.07.2023 - 31.07.2023

  • 2 credits

  Group(s)

  • MT21D-Å

  Teachers and responsibilities

  Peter Björkroth

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   English ML E1 MO22CL03-3001 18.09.2023-06.11.2023  2 credits  (MT21D-Å) +-
  Competence objectives of the study unit

  The student is able to
  • use the information from scientific sources as well as analyse and present it in an appropriate way.
  • participate and argue in discussions dealing with demanding subjects.
  • develop a written report which is formulated according to the Novia University of Applied Sciences instructions for the final projects.

  Prerequisites

  Professional English 1

  Content of the study unit

  Articles (or other literature) chosen by the lecturer on areas relevant for ship’s officers. The themes for the articles can vary and may include e.g. leadership, personnel administration, technical developments, risk management, business management, etc.
  Seminars during which the students have specific tasks and in which they actively participate.

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  18.09.2023 - 06.11.2023

  Enrollment date range

  15.06.2023 - 17.09.2023

  • 2 credits

  Group(s)

  • MT21D-Å

  Teachers and responsibilities

  Peter Björkroth

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Environmental Protection MO22O402-3001 05.02.2024-15.03.2024  0.75 credits  (MT20D-Å, ...) +-
  Competence objectives of the study unit

  STCW-Code: Table A-III/1
  The student is provided with knowledge of the precautions to be taken to prevent pollution of the marine environment including:
  Measures to prevent pollution and all equipment with reference to this.
  Knowing the effects of seafaring on the marine environment and the sources of discharge.
  Knowing the procedures which should be taken in order to prevent pollution of the marine environment with reference to both normal vessel operations and accidents.
  Knowing about the obligation to report in case of damage on the vessel or observing oil in the water.

  Prerequisites

  None

  Content of the study unit

  • Pollution of the marine environment and sources of discharge.
  • MARPOL
  • HELCOM
  • Finnish national legislation with reference to prevention of water pollution caused by vessels
  • Measures to be taken onboard vessels to prevent discharge and spillage
  • Equipment and systems for the prevention of discharge and spillage
  • Environmental certificates onboard
  • Preventive measures for pollution protection

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  05.02.2024 - 15.03.2024

  Enrollment date range

  06.01.2024 - 04.02.2024

  • 0.75 credits

  Group(s)

  • MT20D-Å
  • MT21D-Å
  • MT22D-Å

  Teachers and responsibilities

  Emilia Lindroos

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Hydraulics and Pneumatics MO22O303-3001 12.02.2024-15.03.2024  1.5 credits  (MT22D-Å) +-
  Competence objectives of the study unit

  STCW-Code:Table A-III/1
  Student:
  • has knowledge of hydraulics and pneumatic systems.
  • understand the working order of different components and system applications. a
  • ability to handle operation, maintenance and troubleshooting.

  Prerequisites

  None

  Content of the study unit

  • Basics and flow laws
  • Pumps and motors
  • Hydraulic cylinders and turning gears
  • Valves
  • Servo
  • Accumulators
  • Troubleshooting and system building
  • Press and flow
  • Steering techniques
  • Components
  • Symbols
  • Scheme reading
  • Air treatment
  • Troubleshooting and maintenance

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  12.02.2024 - 15.03.2024

  Enrollment date range

  01.12.2023 - 11.02.2024

  • 1.5 credits

  Group(s)

  • MT22D-Å

  Teachers and responsibilities

  Esa Lapela

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   ISM + Conventions MO22O408-3001 22.04.2024-10.05.2024  0.5 credits  (MT22D-Å) +-
  Competence objectives of the study unit

  The student
  • has skills to manage human and technical resources in an operative vessel environment
  • is able to create conditions for a change in the attitudes towards a safer working culture and environment.

  Prerequisites

  None

  Content of the study unit

  • The course aims at giving onboard personnel an opportunity to use and coordinate the knowledge, experience and resources which are available onboard and ashore in order to obtain and develop established safety and environmental protection objectives.
  • The participant realizes the benefits of a good management system and good teamwork and is able to communicate in an efficient and clear manner, to surpass cultural differences, to use common terminology and give examples of how attitudes and values can affect the decision-making process.

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  22.04.2024 - 10.05.2024

  Enrollment date range

  01.12.2023 - 21.04.2024

  • 0.5 credits

  Group(s)

  • MT22D-Å

  Teachers and responsibilities

  Emilia Lindroos

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   IT Studies 1 MO22CN12-3002 04.09.2023-13.11.2023  1.5 credits  (MT23D-Å) +-
  Competence objectives of the study unit

  The student is provided with knowledge of the basics of information technology, word-processing, table management and information communication.

  Prerequisites

  None

  Content of the study unit

  • Basics of information technology
  • The characteristics of Windows
  • Microsoft Office Word
  • Microsoft Office Excel
  • Microsoft PowerPoint
  • Internet and e-mail

  ---

  Mode of delivery

  Face-to-face

  Learning material

  Material on ItsLearning

  Learning methods

  Lectures
  Excercises

  Objects, timing and methods of assessment

  Approved home assignments and online exams

  Teaching language

  English

  Timing

  04.09.2023 - 13.11.2023

  Enrollment date range

  15.06.2023 - 03.09.2023

  • 1.5 credits

  Group(s)

  • MT23D-Å

  Teachers and responsibilities

  Esa Lapela, Katarina Sandström

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  Approved/Rejected

  Alternative methods of attainment for implementation

  Assignments in Word, Powerpoint and Excel.
  Online exams.

  Exam dates and retake possibilities

  Dates will be published in ItsLearning

  Student's schedule and workload

  Lectures and exercises 16h
  Assignments 14,5h
  Online exams 10h

  Content scheduling

  Introduction to different software, for example:
  Word
  Powerpoint
  Excel
  MathCad

  Assessment criteria

  Approved / Failed

  Approved home assignments and at least 70% correct in online exams

•   Installation, Mounting and Maintenance MO22O304-3001 26.02.2024-12.04.2024  1.5 credits  (MT22D-Å) +-
  Competence objectives of the study unit

  STCW-Code:Table A-III/1
  Students:
  • are to plan and execute their work/tasks in a sustainable manner while considering economical aspects, the environment and occupational safety.
  • are expected to choose and utilise the correct instruments/tools/equipment, special tool and measuring equipment in an applicable way.

  Prerequisites

  Ship Diesel Engine 1
  Marine Engines
  Steam Boilers and Turbines

  Content of the study unit

  • Secure working methods and safety precautions for service and installation work
  • Installation and hand tools
  • Service and repair of ship engines and machinery
  • Preparation and performimg of installation or servicing of machinery in a professional manner in accordance with mechanical drawings/engineering drawings
  • Instructions

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  26.02.2024 - 12.04.2024

  Enrollment date range

  01.12.2023 - 25.02.2024

  • 1.5 credits

  Group(s)

  • MT22D-Å

  Teachers and responsibilities

  Bertel Henriksson

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Internal Combustion Engines MO22O101-3001 27.11.2023-31.12.2023  1.5 credits  (MT22D-Å) +-
  Competence objectives of the study unit

  STCW-Code: Table A-III/1
  Students:
  • has basic skills in the structure, function and use of the internal combustion engines.

  Prerequisites

  None

  Content of the study unit

  • Application areas on board vessels
  • Struktural design and division
  • 2- stroke and 4- stroke
  • Fuel-, lubrication-, cooling and starting systems
  • Combustion and exhaust

  ---

  Mode of delivery

  Face-to-face

  Learning methods

  Project/Task base course. Tuesday 28.11.2023, starting 9.00 onsite. mandatory participation require for approved course credits.

  Objects, timing and methods of assessment

  Completed projects and tasks. Participating in mandatory lecture.

  Teaching language

  English

  Timing

  27.11.2023 - 31.12.2023

  Enrollment date range

  15.06.2023 - 26.11.2023

  • 1.5 credits

  Group(s)

  • MT22D-Å

  Teachers and responsibilities

  Bertel Henriksson

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   International Legislative Requirements and Environmental Management Systems MO22M402-3001 22.01.2024-16.02.2024  1 credits  (MT21D-Å) +-
  Competence objectives of the study unit

  STCW- Code: Table A-II/2, A-II/2;
  Monitor and control compliance with international legislative requirements and measures to ensure the protection of the marine environment.

  Prerequisites

  Sustainable Development
  ISM

  Content of the study unit

  • Certificates and other documents required to be carried onboard ships
  • International Convention on Load Lines
  • International Convention for the Safety Of Life at Sea (SOLAS)
  • International Convention for the Prevention of Pollution of Ships (MARPOL)
  • International Health Regulations

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  22.01.2024 - 16.02.2024

  Enrollment date range

  01.12.2023 - 21.01.2024

  • 1 credits

  Group(s)

  • MT21D-Å

  Teachers and responsibilities

  Emilia Lindroos

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Law and Legislation 1 MO22S12-3002 02.10.2023-06.11.2023  1 credits  (MT23D-Å) +-
  Competence objectives of the study unit

  The student
  • has thorough knowledge of the legislation regulating the duties and occupational protection onboard as well as the effects seafaring has on the environment.
  • is able to undertake precautionary measures to prevent the pollution of the maritime environment.
  • understands orders and is understood in regard to onboard duties.
  • is able to contribute towards meaningful interpersonal relations onboard a vessel.
  • is aware of the existence of international safety conventions regarding maritime environment and ship safety.

  Prerequisites

  None

  Content of the study unit

  • Basics in the Merchant Shipping Act, maritime labour legislation and maritime law
  • Decree on watchkeeping onboard and the signing-on procedures
  • Regulations governing loading and discharging
  • Legislation on the safety in onboard work
  • Environmental legislation
  • The organizational structure of a vessel, the shipping company and the authorities concerned

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  02.10.2023 - 06.11.2023

  Enrollment date range

  15.06.2023 - 01.10.2023

  • 1 credits

  Group(s)

  • MT23D-Å

  Teachers and responsibilities

  Tony Karlsson

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Law and Legislation 1 MO20S12GMC-3002 10.10.2023-30.12.2023  1 credits +-
  Competence objectives of the study unit

  The student
  • has thorough knowledge of the legislation regulating the duties and occupational protection onboard as well as the effects seafaring has on the environment.
  • is able to undertake precautionary measures to prevent the pollution of the maritime environment.
  • understands orders and is understood in regard to onboard duties.
  • is able to contribute towards meaningful interpersonal relations onboard a vessel.
  • is aware of the existence of international safety conventions regarding maritime environment and ship safety.

  Prerequisites

  None

  Content of the study unit

  • Basics in the Merchant Shipping Act, maritime labour legislation and maritime law
  • Decree on watchkeeping onboard and the signing-on procedures
  • Regulations governing loading and discharging
  • Legislation on the safety in onboard work
  • Environmental legislation
  • The organizational structure of a vessel, the shipping company and the authorities concerned

  ---

  Person(s) in charge

  Tony Karlsson

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  10.10.2023 - 30.12.2023

  Enrollment date range

  10.09.2023 - 09.10.2023

  • 1 credits

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Campus

  Åbo, Hertig Johans parkgata 21

  Assessment scale

  H-5

•   Law and Legislation 2 MO22O411-3002 25.09.2023-31.10.2023  1 credits  (MT22D-Å) +-
  Competence objectives of the study unit

  Basic knowledge of adequate conventions produced by IMO regarding safety and environmental protection of the marine environment. The basics of national maritime law.
  Have an idea of the social system, the courts function and so on. Understand the meaning of the conclusion of the employment contract, understand carbon-bargaining agreement. Be aware of employers' and workers’ rights and duties of board, be aware on forced and compulsory regulations.
  Recognize the existence of international safety conventions regarding marine and vessel safety (IMO, SOLAS, MARPOL).

  Prerequisites

  Law and Legislation 1

  Content of the study unit

  Seamen's Act and related legislation such as;
  • Conscription Act.
  • Collective Bargaining Act.
  • Act on the Rules of Court.
  • The law on mediation in labor disputes.
  • The Act on Cooperation within Undertakings.
  • Maritime Working Hours Act.
  • Annual Holidays for sailors.
  • Law on the Protection of the work.
  • Maritime Law and related legislation
  • Conventions (SOLAS and MARPOL).

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  25.09.2023 - 31.10.2023

  Enrollment date range

  02.07.2025 - 31.07.2025

  • 1 credits

  Group(s)

  • MT22D-Å

  Teachers and responsibilities

  Ossi Westilä

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   MRM (Maritime Resource Management) MO22O406-3001 22.04.2024-10.05.2024  1 credits  (MT22D-Å) +-
  Competence objectives of the study unit

  STCW A-III/1, A-III/2
  The student
  • has skills to manage human and technical resources in an operative vessel environment
  • is able to create conditions for a change in the attitudes towards a safer working culture and environment.

  Prerequisites

  None

  Content of the study unit

  • The course aims at giving onboard personnel an opportunity to use and coordinate the knowledge, experience and resources which are available onboard and ashore in order to obtain and develop established safety and environmental protection objectives.
  • The participant realises the benefits of a good management system and good teamwork and is able to communicate in an efficient and clear manner, to surpass cultural differences, to use common terminology and give examples of how attitudes and values can affect the decision-making process.
  • The Maritime Resource Management (MRM) course has been developed by “The Swedish Club” marine insurance company.

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  22.04.2024 - 10.05.2024

  Enrollment date range

  01.12.2023 - 21.04.2024

  • 1 credits

  Group(s)

  • MT22D-Å

  Teachers and responsibilities

  Bertel Henriksson

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Machine Elements MO15M105-3001 22.01.2024-08.03.2024  3 credits  (MT20D-Å) +-
  Competence objectives of the study unit

  The student is familiar with and has knowledge about the most important machine elements, their areas of use, stress, strain and dimensioning.

  Prerequisites

  None

  Content of the study unit

  Most important machine elements, their areas of use, stress, strain and dimensioning.

  ---

  Person(s) in charge

  Kaj Rintanen

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  22.01.2024 - 08.03.2024

  Enrollment date range

  01.12.2023 - 21.01.2024

  • 3 credits

  Group(s)

  • MT20D-Å

  Teachers and responsibilities

  Esa Lapela

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Management of Service and Maintenance MO22M302-3001 04.03.2024-28.03.2024  1.75 credits  (MT22D-Å, ...) +-
  Competence objectives of the study unit

  STCW- Code: Table AIII/2
  
  The student:
  • has theoretical knowledge of marine engineering practice
  • has practical knowledge of management of safe and effective maintenance and repair procedures
  • has practical knowledge of planning maintenance, including statutory and class verifications
  • has practical knowledge of planning repairs
  • has practical knowledge of detection of machinery malfunction, location of faults and action to prevent damage
  • has practical knowledge of inspection and adjustment of equipment
  • has practical knowledge of non-destructive examination

  Prerequisites

  Operational level studies

  Content of the study unit

  • maintenance and repair procedures
  • detection of machinery malfunction, location of faults and action to prevent damage

  ---

  Mode of delivery

  Face-to-face

  Learning material

  Novi maintenance program are used under the first week. Classification rules and authority regulations are to be found on internet. Itslearning.

  Learning methods

  Class studies and project team work.

  Objects, timing and methods of assessment

  Credit scale 0-5. Evaluated project and report.

  Teaching language

  English

  Timing

  04.03.2024 - 28.03.2024

  Enrollment date range

  02.01.2024 - 03.03.2024

  • 1.75 credits

  Group(s)

  • MT22D-Å
  • MT21D-Å
  • MT23D-Å
  • MT20D-Å

  Teachers and responsibilities

  Bertel Henriksson

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

  Alternative methods of attainment for implementation

  None

  Exam dates and retake possibilities

  Project presentation 8.3.2024 9.00

  Student's schedule and workload

  1,75 credits, two weeks including project and report.

  Assessment criteria

  Failed course by missing deadlines. Course to be retaken next year.

•   Marine Engines MO22O102-3001 27.11.2023-22.12.2023  4.5 credits  (MT23D-Å) +-
  Competence objectives of the study unit

  STCW-Code: Table A-III/1
  Students:
  Basic skills in the function and structure of diesel engines. Ability to take responsibility for the operation and maintenance of the ship’s auxiliary and main machinery.

  Prerequisites

  Internal combustion engines

  Content of the study unit

  • Circuit processes and efficiency of diesel engines
  • Combustion sequence/processes and fuel
  • Gas (ex)change and air charge
  • Crankmovement, its force and elements
  • Mass force and balancing
  • Flywheel and torsionals/torsion turns
  • Critical speed and oscilation damping
  • Energy recovery in diesel engine applications
  • Environmental impact and exhaust emission control
  • Control systems and monitoring
  • Rules of the flag States and classification society

  ---

  Mode of delivery

  Face-to-face

  Learning methods

  Lectures, Engine laborations and simulations. Written exam.

  Objects, timing and methods of assessment

  Exam and approved simulation and laborations. Compulsory attendance in simulator and engine laborations.

  Teaching language

  English

  Timing

  27.11.2023 - 22.12.2023

  Enrollment date range

  15.06.2023 - 26.11.2024

  • 4.5 credits

  Group(s)

  • MT23D-Å

  Teachers and responsibilities

  Bertel Henriksson

  Additional information

  Part of the studies will be hekd at the engine laboratory in Parainen. Safety shoos will be needed.

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

  Alternative methods of attainment for implementation

  Theory, engine laborations and simulation

•   Marine Fuels and Lubrications MO22O309-3001 15.04.2024-10.05.2024  1 credits  (MT22D-Å) +-
  Competence objectives of the study unit

  STCW-Code: Table A-III/1
  Students:
  acquire basic knowledge of the use of different fuels and lubricants on board the ship

  Prerequisites

  Maritime Chemistry

  Content of the study unit

  • Characteristics and types of fuel and lubricating oils
  • Samples and analyzes
  • Actions and errors
  • Cleaning system

  ---

  Mode of delivery

  50% Face-to-face, 50% Distance learning

  Learning material

  Material will ba available on Itslearning

  Teaching language

  English

  Timing

  15.04.2024 - 10.05.2024

  Enrollment date range

  01.12.2023 - 14.04.2024

  • 1 credits

  Group(s)

  • MT22D-Å

  Teachers and responsibilities

  Esa Lapela, Thomas Lundberg

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Share of online studies

  0.5 credits

  Assessment scale

  H-5

•   Maritime Chemistry MO22CN11-3002 04.09.2023-13.11.2023  1 credits  (MT23D-Å) +-
  Competence objectives of the study unit

  STCW-Code Table AIIII/5
  The student is able to assess the chemical characteristics of different cargoes both from safety and environmental perspectives and understands the chemical background of cargo handling.

  Prerequisites

  None

  Content of the study unit

  • Dangerous goods
  • Corrosion

  ---

  Mode of delivery

  Face-to-face

  Learning material

  Material on ItsLearning

  Learning methods

  100% virtual course.

  Objects, timing and methods of assessment

  Online quiz

  Teaching language

  English

  Timing

  04.09.2023 - 13.11.2023

  Enrollment date range

  15.06.2023 - 03.09.2023

  • 1 credits

  Group(s)

  • MT23D-Å

  Teachers and responsibilities

  Esa Lapela, Katarina Sandström

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

  Alternative methods of attainment for implementation

  Online quiz

  Exam dates and retake possibilities

  Open online quiz November 2023

  Assessment criteria

  Less than 45% correct

  Assessment criteria – satisfactory (1-2)

  45-60% correct

  Assessment criteria – good (3-4)

  60-90% correct

  Assessment criteria – excellent (5)

  More than 90% correct

•   Maritime Economics MO22M404-3001 05.02.2024-30.04.2024  2 credits  (MT21D-Å) +-
  Competence objectives of the study unit

  The student is provided with knowledge of the world trade, economics and how goods generally move globally. He/she gains knowledge of the functioning mechanisms and operating principles of freight markets. The student is familiar with the cost construction in connection with shipping company operations and vessel operations and financing.

  Prerequisites

  None

  Content of the study unit

  • International trade
  • Material administration and logistics
  • Sea transports
  • Forwarding
  • Shipping company administration

  ---

  Person(s) in charge

  Bertel Henriksson

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  05.02.2024 - 30.04.2024

  Enrollment date range

  01.12.2023 - 04.02.2024

  • 2 credits

  Group(s)

  • MT21D-Å

  Teachers and responsibilities

  Thomas Finne

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Material Mechanics and Strength Calculations 1 MO22M103-3001 27.11.2023-15.01.2024  3 credits  (MT21D-Å) +-
  Competence objectives of the study unit

  STCW- Code: Table A-III/2
  
  The student:
  • has theoretical knowledge of mechanics
  • has theoretical knowledge of hydromechanics
  • understand naval architecture and ship construction, including damage control

  Prerequisites

  Operational level studies

  Content of the study unit

  • Mechanics
  • Hydromechanics
  • Strength of materials
  • Technology of materials
  • Naval architecture and ship construction, including damage control

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  27.11.2023 - 15.01.2024

  Enrollment date range

  28.10.2023 - 26.11.2023

  • 3 credits

  Group(s)

  • MT21D-Å

  Teachers and responsibilities

  Esa Lapela

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Material Mechanics and Strength Calculations 2 MO22M104-3001 02.04.2024-30.04.2024  3 credits  (MT20D-Å, ...) +-
  Competence objectives of the study unit

  The student is provided with advanced knowledge about aspects related to the strength of materials in the construction process as well as advanced knowledge about the principles of the strength of materials as part of the process and in addition to other planning.

  Prerequisites

  Mechanics 1

  Content of the study unit

  Strength of materials in the construction process.
  Principles of the strength of materials as part of the process and in addition to other planning.

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  Timing

  02.04.2024 - 30.04.2024

  Enrollment date range

  02.03.2024 - 01.04.2024

  • 3 credits

  Group(s)

  • MT20D-Å
  • MT21D-Å
  • MT22D-Å

  Teachers and responsibilities

  Esa Lapela

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Materials Science MO22O302-3001 18.03.2024-03.05.2024  3 credits  (MT22D-Å) +-
  Competence objectives of the study unit

  STCW-Code:Table A-III/1
  Students:
  • are expected to know the different materials and their properties used aboard ships.

  Prerequisites

  Physics 1
  Physics 2

  Content of the study unit

  • Characteristics and standards for design, coal, alloy and cast steel
  • Iron and coal alloy state diagrams and tension strain diagrams
  • Heat treatment
  • The steel's most important alloy metals
  • Cast iron
  • Copper alloy and light metals
  • Plastics and elastomers
  • Ceramics

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  18.03.2024 - 03.05.2024

  Enrollment date range

  01.12.2023 - 17.03.2024

  • 3 credits

  Group(s)

  • MT22D-Å

  Teachers and responsibilities

  Katarina Sandström

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Mathematics 1 MO22CN01-3002 18.09.2023-13.11.2023  1.5 credits  (MT23D-Å) +-
  Competence objectives of the study unit

  To provide the student with good mathematical readiness, in algebra, for further studies at the university of applied sciences level.

  Prerequisites

  No prerequisites

  Content of the study unit

  • algebraical simplifications
  • polynomial and rational expressions
  • numerical understanding
  • involutions and logarithms
  • equations

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  18.09.2023 - 13.11.2023

  Enrollment date range

  15.06.2023 - 17.09.2023

  • 1.5 credits

  Group(s)

  • MT23D-Å

  Teachers and responsibilities

  Esa Lapela, Katarina Sandström

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Mathematics 2 MO22CN02-3002 16.10.2023-03.12.2023  1.5 credits  (MT23D-Å) +-
  Competence objectives of the study unit

  To provide the student with good mathematical readiness for further studies at the university of applied sciences level.

  Prerequisites

  Mathematics 1

  Content of the study unit

  • trigonometry
  • geometry
  • vectors
  • mathematical analysis

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  16.10.2023 - 03.12.2023

  Enrollment date range

  15.06.2023 - 15.10.2023

  • 1.5 credits

  Group(s)

  • MT23D-Å

  Teachers and responsibilities

  Esa Lapela, Katarina Sandström

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Mathematics 3/4 MO22CN03-3002 22.01.2024-15.03.2024  3 credits  (MT23D-Å) +-
  Competence objectives of the study unit

  The student understands the concept of differential coefficient and knows how to apply it.
  The student is able to perform easier derivative and integral calculations.
  The student is able to determine surfaces and volumes with the help of integrals.

  Prerequisites

  Mathematics 2

  Content of the study unit

  • Repetition of Mathematics 2
  • Differential coefficient
  • Derivation of functions
  • Min-Max problem
  • Application in physics on distance, speed and acceleration
  • Integrals
  • Indeterminate integrals
  • Integration of functions
  • Definite integrals
  • Calculating surfaces and volumes with the help of integrals
  • Simpson’s rule

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  22.01.2024 - 15.03.2024

  Enrollment date range

  02.12.2023 - 21.01.2024

  • 3 credits

  Group(s)

  • MT23D-Å

  Teachers and responsibilities

  Katarina Sandström

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Mathematics 6 MO22CN04-3001 02.02.2024-31.07.2026  1.5 credits  (MT21D-Å) +-
  Competence objectives of the study unit

  The student is provided with knowledge of graphical representations and interpretation of statistical material.
  The student is familiar with the basics of probability calculus and has knowledge of the normal distribution.

  Prerequisites

  Mathematics 2

  Content of the study unit

  • Statistical methods
  • Graphical representation
  • Standard and statistical probability
  • Binomial probability
  • Expected values and measurement dispersion
  • Normal distribution
  • t-distribution

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  02.02.2024 - 31.07.2026

  Enrollment date range

  03.01.2024 - 01.02.2024

  • 1.5 credits

  Group(s)

  • MT21D-Å

  Teachers and responsibilities

  Peter Björkroth, Katarina Sandström

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Mathematics 6 MO15CN04-3001 26.02.2024-01.04.2024  1.5 credits  (MT20D-Å) +-
  Competence objectives of the study unit

  The student is provided with knowledge of graphical representations and interpretation of statistical material.
  The student is familiar with the basics of probability calculus and has knowledge of the normal distribution.

  Prerequisites

  Mathematics 2

  Content of the study unit

  • Statistical methods
  • Graphical representation
  • Standard and statistical probability
  • Binomial probability
  • Expected values and measurement dispersion
  • Normal distribution
  • t-distribution

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  26.02.2024 - 01.04.2024

  Enrollment date range

  01.12.2023 - 25.02.2024

  • 1.5 credits

  Group(s)

  • MT20D-Å

  Teachers and responsibilities

  Esa Lapela, Katarina Sandström

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Mathematics 7 MO22CN05-3001 27.11.2023-08.01.2024  1.5 credits  (MT21D-Å) +-
  Competence objectives of the study unit

  The student is able to apply linear optimization when planning the transport of cargoes to several ports.
  The student is provided with knowledge of differential coefficient and integral application to cargo handling and ship theory.

  Prerequisites

  Mathematics 3/4

  Content of the study unit

  • Linear optimization
  • Application of differential coefficient on miscalculation and solution of equations
  • Integrals for the calculus of centres of gravity and moments of inertia

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  27.11.2023 - 08.01.2024

  Enrollment date range

  28.10.2023 - 26.11.2023

  • 1.5 credits

  Group(s)

  • MT21D-Å

  Teachers and responsibilities

  Esa Lapela

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Mathematics 8 MO22CN06-3002 04.09.2023-20.11.2023  3 credits  (MT21D-Å) +-
  Competence objectives of the study unit

  To provide the student with good skills in mathematics in order to be able to solve practical problems.

  Prerequisites

  Mathematics 3/4

  Content of the study unit

  • Both 2-D and 3-D vectors and operating with theme.
  • Matrixes.
  • Differential equations and their use in engineering applications

  ---

  Person(s) in charge

  Kaj Rintanen

  Mode of delivery

  34% Face-to-face, 66% Distance learning

  Learning material

  More information on ItsLearning

  Learning methods

  Lectures
  Exercises
  Homework

  Objects, timing and methods of assessment

  Written onsite exam
  Online exam
  Home assignment

  Teaching language

  English

  Timing

  04.09.2023 - 20.11.2023

  Enrollment date range

  15.06.2023 - 03.09.2023

  • 3 credits

  Group(s)

  • MT21D-Å

  Teachers and responsibilities

  Katarina Sandström

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Share of online studies

  2 credits

  Assessment scale

  H-5

  Student's schedule and workload

  Lectures 25h
  Exams 25h
  Homework 31h

  Assessment criteria

  Less than 45% correct in exams and assignment

  Assessment criteria – satisfactory (1-2)

  Between 45%-65% correct in exams and assignment

  Assessment criteria – good (3-4)

  Between 65%-90% correct in exams and assignment

  Assessment criteria – excellent (5)

  More than 90% correct in exams and assignment

•   Measurement and Control Engineering MO22M203-3001 13.11.2023-31.12.2023  3 credits  (MT21D-Å) +-
  Competence objectives of the study unit

  STCW- Code: Table A-III/2
  
  The student:
  • has theoretical knowledge of managing control equipment for marine electrotechnology, electronics and power electronics
  • has theoretical knowledge of managing control systems for main engine, generator and distribution systems and steam boilers
  • has theoretical knowledge of design features and system configuration of control systems for electrical motors and high voltage installations
  • has theoretical knowledge of control of pneumatic control equipment
  • has practical knowledge of troubleshooting control devices and monitoring systems

  Prerequisites

  Operational level studies

  Content of the study unit

  - Control Engineering
  - PID control
  - pneumatic control

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  13.11.2023 - 31.12.2023

  Enrollment date range

  14.10.2023 - 12.11.2023

  • 3 credits

  Group(s)

  • MT21D-Å

  Teachers and responsibilities

  Katarina Sandström

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Mechanics 1 MO22M101-3001 18.09.2023-06.11.2023  3 credits  (MT21D-Å) +-
  Competence objectives of the study unit

  The student understands and is able to apply the principles for the rigid body mechanics to equilibrium problems.

  Prerequisites

  None

  Content of the study unit

  Statics:
  • Calculate the resultant of a force system.Solution of 2 and 3-dimensional equilibrium problems.Application of equilibrium equations when calculating statically determined structures. (e.g. frameworks)
  • Equilibrium solutions to rigid bodies problems, calculations of center of gravity.
  • Calculation of mechanisms.
  • The impact friction has on static equilibrium problems.
  • Calculation of mechanisms by means of principles of virtual work

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  Timing

  18.09.2023 - 06.11.2023

  Enrollment date range

  15.06.2023 - 17.09.2023

  • 3 credits

  Group(s)

  • MT21D-Å

  Teachers and responsibilities

  Esa Lapela

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Mechanics 2 MO15M102-3001 11.03.2024-25.04.2024  3 credits  (MT20D-Å) +-
  Competence objectives of the study unit

  The course provides the student with advanced knowledge about rigid body mechanics and skills to apply the principles to dynamic processes.

  Prerequisites

  None

  Content of the study unit

  Dynamics:
  • Kinematics of a Particle.
  • Kinetics of a Particle:
  o Force and Acceleration
  o Work and Energy
  o Impulse and Momentum
  • Kinetics of a Rigid Body:
  o Force and Acceleration
  o Work and Energy
  o Impulse and Momentum

  ---

  Person(s) in charge

  Bertel Henriksson

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  11.03.2024 - 25.04.2024

  Enrollment date range

  01.12.2023 - 10.03.2024

  • 3 credits

  Group(s)

  • MT20D-Å

  Teachers and responsibilities

  Esa Lapela

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Campus

  Åbo, Hertig Johans parkgata 21

  Assessment scale

  H-5

•   Mechanics of Materials 2 MO15M104-3001 02.04.2024-24.05.2024  3 credits  (MT20D-Å) +-
  Competence objectives of the study unit

  The student is provided with advanced knowledge about aspects related to the strength of materials in the construction process as well as advanced knowledge about the principles of the strength of materials as part of the process and in addition to other planning.

  Prerequisites

  None

  Content of the study unit

  Strength of materials in the construction process.
  Principles of the strength of materials as part of the process and in addition to other planning.

  ---

  Person(s) in charge

  Kaj Rintanen

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  02.04.2024 - 24.05.2024

  Enrollment date range

  01.12.2023 - 01.04.2024

  • 3 credits

  Group(s)

  • MT20D-Å

  Teachers and responsibilities

  Kaj Rintanen

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Medical Care 1, First Aid MO22S16-3003 11.11.2023-25.11.2023  0.75 credits  (MT23D-Å) +-
  Competence objectives of the study unit

  The student gains basic knowledge and skills in first aid as to various kinds of accidents and illnesses onboard a vessel, in accordance with STCWCode: A-VI/1-3, A-VI/2-1, A-III/4, A-III/5.

  Prerequisites

  None

  Content of the study unit

  • first aid principles
  • first aid onboard vessels, the contents of the first aid kit
  • elementary knowledge of the anatomy and physiology of the vital functions
  • resuscitation
  • first aid in the following situations:
  o the most common attacks of illness: chest pains, stroke, diabetes and epilepsy
  o wounds and major bleeding
  o shock
  o fractures, joint and muscle injuries
  o burns and scalds
  o hypothermia and frost bites
  o poisonings
  o examination and moving of an injured person

  Further information

  Course in Elementary First Aid
  
  
  The course has been designed in accordance with the framework given in the STCW convention, section A-VI/1, paragraph 2.1.3 (table A-VI/1-3). It has comprised a total of 16 hours of instruction and practical exercises.

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  11.11.2023 - 25.11.2023

  Enrollment date range

  15.06.2023 - 10.11.2023

  • 0.75 credits

  Group(s)

  • MT23D-Å

  Seats

  0 - 15

  Teachers and responsibilities

  Ritva Lindell

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Medical Care 1, First Aid MO20S16GMC-3002 10.10.2023-30.12.2023  0.75 credits +-
  Competence objectives of the study unit

  The student gains basic knowledge and skills in first aid as to various kinds of accidents and illnesses onboard a vessel, in accordance with STCWCode: A-VI/1-3, A-VI/2-1, A-III/4, A-III/5.

  Prerequisites

  None

  Content of the study unit

  • first aid principles
  • first aid onboard vessels, the contents of the first aid kit
  • elementary knowledge of the anatomy and physiology of the vital functions
  • resuscitation
  • first aid in the following situations:
  o the most common attacks of illness: chest pains, stroke, diabetes and epilepsy
  o wounds and major bleeding
  o shock
  o fractures, joint and muscle injuries
  o burns and scalds
  o hypothermia and frost bites
  o poisonings
  o examination and moving of an injured person

  ---

  Person(s) in charge

  Tony Karlsson

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  10.10.2023 - 30.12.2023

  Enrollment date range

  10.09.2023 - 09.10.2023

  • 0.75 credits

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Medical Care 2 MO22O405-3001 29.02.2024-08.03.2024  1.5 credits  (MT22D-Å) +-
  Competence objectives of the study unit

  STCW-Code: Table A-III/1
  The student
  • has the knowledge and skills to give immediate first aid onboard the vessel,
  • knows the first aid to be given in accidents in connection with transportation of dangerous goods.
  • knows how to examine an injured/ill person and can evaluate the need for help.
  • is able to apply the medical care manual to practice,
  • has the skills to take appropriate action on the basis of advice received on the radio/through telephone with reference to accidents or illnesses which are likely to happen onboard a vessel.

  Prerequisites

  Medical Care 1

  Content of the study unit

  • medical treatment equipment onboard according to the ship’s medicine chest
  • medical rules and recommendations
  • medical consultation
  • anatomy and physiology (breathing, blood circulation, nervous system, abdominal organs, skeleton)
  • pharmacology (basic principles, forms of medicine, ways of giving medicine, risks of using medicines, handling and storage, using Pharmaca Fennica, abuse of medicines)
  • asepsis and hygiene
  • basics of patient care
  • examining an injured or ill person
  • lack of oxygen in the body; heart attack, cardiac arrest, drowning, lack of consciousness
  • first aid in connection with chemical accidents
  • first aid in connection with spinal injuries, fractures and muscle damages
  • first aid in connection with burns, scalds and frost bites
  • wound care

  Further information

  Course in Elementary First Aid and Proficiency in Medical First Aid
  
  
  The course has been designed in accordance with the framework given in the STCW convention, section A-VI/1, Elementary First Aid sub-paragraph 2.1.3 (table A-VI/1-3) and section A-VI/4 (table A-VI/4-1). It has comprised a total of 24 hours of instruction and practical exercises.

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  29.02.2024 - 08.03.2024

  Enrollment date range

  01.12.2023 - 07.01.2024

  • 1.5 credits

  Group(s)

  • MT22D-Å

  Seats

  1 - 15

  Teachers and responsibilities

  Ritva Lindell

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Medical Care 2 MO22O405-3002 11.03.2024-14.03.2024  1.5 credits  (MT22D-Å) +-
  Competence objectives of the study unit

  STCW-Code: Table A-III/1
  The student
  • has the knowledge and skills to give immediate first aid onboard the vessel,
  • knows the first aid to be given in accidents in connection with transportation of dangerous goods.
  • knows how to examine an injured/ill person and can evaluate the need for help.
  • is able to apply the medical care manual to practice,
  • has the skills to take appropriate action on the basis of advice received on the radio/through telephone with reference to accidents or illnesses which are likely to happen onboard a vessel.

  Prerequisites

  Medical Care 1

  Content of the study unit

  • medical treatment equipment onboard according to the ship’s medicine chest
  • medical rules and recommendations
  • medical consultation
  • anatomy and physiology (breathing, blood circulation, nervous system, abdominal organs, skeleton)
  • pharmacology (basic principles, forms of medicine, ways of giving medicine, risks of using medicines, handling and storage, using Pharmaca Fennica, abuse of medicines)
  • asepsis and hygiene
  • basics of patient care
  • examining an injured or ill person
  • lack of oxygen in the body; heart attack, cardiac arrest, drowning, lack of consciousness
  • first aid in connection with chemical accidents
  • first aid in connection with spinal injuries, fractures and muscle damages
  • first aid in connection with burns, scalds and frost bites
  • wound care

  Further information

  Course in Elementary First Aid and Proficiency in Medical First Aid
  
  
  The course has been designed in accordance with the framework given in the STCW convention, section A-VI/1, Elementary First Aid sub-paragraph 2.1.3 (table A-VI/1-3) and section A-VI/4 (table A-VI/4-1). It has comprised a total of 24 hours of instruction and practical exercises.

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  11.03.2024 - 14.03.2024

  Enrollment date range

  01.12.2023 - 07.01.2024

  • 1.5 credits

  Group(s)

  • MT22D-Å

  Seats

  1 - 15

  Teachers and responsibilities

  Ritva Lindell

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Metal Works MO22S11-3002 11.03.2024-31.05.2024  1 credits  (MT23D-Å) +-
  Competence objectives of the study unit

  STCW-Code:Table A-III/5
  
  The student
  • gets familiar with the most usual cutting and welding methods common onboard modern vessels.
  • gets familiar with the safety measures to be taken when performing work with cutting and welding equipment.
  • gets to know the most common tools used in metal work, their functioning and areas of use.
  • is able to apply occupational safety instructions when using tools and machine tools.
  • knows how to perform minor overhaul and maintenance related tasks.
  • is able to take environmental aspects into consideration in connection with welding and metal work.

  Prerequisites

  None

  Content of the study unit

  • Gas cutting
  • Welding using covered electrodes
  • MIG/MAG welding
  • Tools
  • Measuring, marking, cutting, filing, grinding, drilling and threading
  • Pipes, pipe parts and packings

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  11.03.2024 - 31.05.2024

  Enrollment date range

  02.12.2023 - 11.02.2024

  • 1 credits

  Group(s)

  • MT23D-Å

  Teachers and responsibilities

  Virtual Deck 2

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Metal Works MO20S11GMC-3002 10.10.2023-30.12.2023  1 credits +-
  Competence objectives of the study unit

  STCW-Code:Table A-III/5
  
  The student
  • gets familiar with the most usual cutting and welding methods common onboard modern vessels.
  • gets familiar with the safety measures to be taken when performing work with cutting and welding equipment.
  • gets to know the most common tools used in metal work, their functioning and areas of use.
  • is able to apply occupational safety instructions when using tools and machine tools.
  • knows how to perform minor overhaul and maintenance related tasks.
  • is able to take environmental aspects into consideration in connection with welding and metal work.

  Prerequisites

  None

  Content of the study unit

  • Gas cutting
  • Welding using covered electrodes
  • MIG/MAG welding
  • Tools
  • Measuring, marking, cutting, filing, grinding, drilling and threading
  • Pipes, pipe parts and packings

  ---

  Person(s) in charge

  Tony Karlsson

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  10.10.2023 - 30.12.2023

  Enrollment date range

  10.09.2023 - 09.10.2023

  • 1 credits

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Campus

  Åbo, Hertig Johans parkgata 21

  Assessment scale

  H-5

•   Occupational Safety 1 MO22S13-3002 02.10.2023-06.11.2023  1 credits  (MT23D-Å) +-
  Competence objectives of the study unit

  STCW A-III/5
  • Safety routines
  • is familiar with the accident and health risks onboard, the occupational safety organization and legislation.
  • has knowledge and skills to manage and organize work onboard taking occupational safety into account.

  Prerequisites

  None

  Content of the study unit

  • Familiarization and security awareness
  • Vessel environment from the occupational safety perspective (accident and health risks)
  • Accidents, accident statistics
  • Introduction to Labour Convention (ILO)
  • IMO Conventions

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  02.10.2023 - 06.11.2023

  Enrollment date range

  15.06.2023 - 01.10.2023

  • 1 credits

  Group(s)

  • MT23D-Å

  Teachers and responsibilities

  Tony Karlsson

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Occupational Safety 1 MO20S13GMC-3002 10.10.2023-30.12.2023  1 credits +-
  Competence objectives of the study unit

  STCW A-III/5
  • Safety routines
  • is familiar with the accident and health risks onboard, the occupational safety organization and legislation.
  • has knowledge and skills to manage and organize work onboard taking occupational safety into account.

  Prerequisites

  None

  Content of the study unit

  • Familiarization and security awareness
  • Vessel environment from the occupational safety perspective (accident and health risks)
  • Accidents, accident statistics
  • Introduction to Labour Convention (ILO)
  • IMO Conventions

  ---

  Person(s) in charge

  Tony Karlsson

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  10.10.2023 - 30.12.2023

  Enrollment date range

  10.09.2023 - 09.10.2023

  • 1 credits

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Campus

  Åbo, Hertig Johans parkgata 21

  Assessment scale

  H-5

•   Occupational Safety 2 MO22O409-3002 25.09.2023-30.10.2023  1 credits  (MT22D-Å) +-
  Competence objectives of the study unit

  STCW-Code: Table A-III/1
  The student:
  • knows the safety routines
  • is familiar with the accident and health risks onboard, the occupational safety organization and legislation.
  • has knowledge and skills to manage and organize work onboard taking occupational safety into account.

  Prerequisites

  None

  Content of the study unit

  • Vessel environment from the occupational safety perspective (accident and health risks)
  • Accidents, accident statistics
  • The objectives and organization of and legislation with reference to occupational safety
  • ILO 1996-Accident prevention onboard ship at sea and in port.
  • IMO Conventions

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  25.09.2023 - 30.10.2023

  Enrollment date range

  26.08.2023 - 24.09.2023

  • 1 credits

  Group(s)

  • MT22D-Å

  Teachers and responsibilities

  Ossi Westilä

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Onboard Community and Watchkeeping Duties MO22S01-3002 11.09.2023-29.10.2023  1.5 credits  (MT23D-Å) +-
  Competence objectives of the study unit

  STCW- Code: Table A-II/4
  STCW- Code: Table A-III/4, A-III/5
  STCW- Code: Table B-VI/6
  
  The student
  • is familiarised with the vessel as a social environment and work place
  • knows the on board community and how it functions
  • knows the watchkeeping arrangements on board vessels at sea and in port
  • knows how to keep a navigational watch according to the principles of good seamanship
  • knows how to steer the vessel and how to follow helm orders also when given in the English language
  • knows how to steer using magnetic and gyro-compasses
  • understands helm orders
  • knows how to change over from automatic pilot to hand steering and vice versa
  • knows the decisions on manning of ships, certification of seafarers and watchkeeping on board
  • gains a thorough knowledge of different communication systems on board
  • gains a thorough knowledge of alarm systems on board and one's personal duties in connection with these
  • is able to understand orders and to use seafaring terminology and definitions with the officer of the watch, and to handover watch according to the watchkeeping routines, and knows the responsibilities of a look-out
  • is familiar with the preparations before arrival, taking a pilot on board, anchoring operations and mooring
  • is familiar with the basic principles of the protection of the marine environment
  • Familiarisation and security awareness

  Prerequisites

  None

  Content of the study unit

  • organization onboard a vessel
  • watchkeeping routines
  • compasses
  • automatic pilot
  • helm orders
  • exercises in steering the vessel
  • courses and bearings
  • manoeuvring signals
  • using the vessel’s internal communication systems
  • terminology and information in connection with watchkeeping duties
  • regulations in connection with watchkeeping as applicable
  • environmental protection in connection with watchkeeping duties
  • adequate security training for seafarers

  Further information

  Security-related Training and Instruction
  for Seafarers with Designated Security Duties
  
  
  The course has been designed in accordance with the framework given in the STCW convention Table A-VI/6-1 and Table A-VI/6-2 and the International Ship and Port Facility Security (ISPS) Code, part A and B. It has comprised a total of 9 hours of instruction.

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  11.09.2023 - 29.10.2023

  Enrollment date range

  15.06.2023 - 10.09.2023

  • 1.5 credits

  Group(s)

  • MT23D-Å

  Teachers and responsibilities

  Tony Karlsson

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Onboard Training, Operational Level MO22OT01-3001 02.12.2023-21.12.2023  6 credits  (MT22D-Å) +-
  Competence objectives of the study unit

  The student gets an insight into the tasks in mechanical engineering and safety, which belongs to the studies, these are carried out in a vessel environment or partly in workshop environment.

  Prerequisites

  Onboard Training Support Level

  Content of the study unit

  The supervised onboard training is totally 360 days in order to gain the watchkeeping engineer certificate, of these days can the maximum in the different sub areas be:
  • Machinery over 750 kW, 360 days (support & operational level)
  • Audited school ship, 60 days (support & operational level)
  • Military service, 60 days (operational level)
  • Simulator training, 30 days (operational level)
  • Workshop training, 180 days, can also be training in workshop on shore in the shipping industry (operational level)
  For instance, for a student a typical training can be:
  • Machinery over 750 kW, 30 & 80 days (support & operational level)
  • Audited school ship, 30 & 30 days (support & operational level)
  • Military service, 30 days (operational level)
  • Simulator training, 10 days (operational level)
  • Workshop training, 150 days, can also be training in workshop on shore in the shipping industry (operational level)
  • Totally 360 days (support & operational level)
  There are totally 18 study units (courses) in the curriculum and every study unit is worth 6 ECTS. Every 6 ECTS corresponds to 20 days of training. The training will only be approved in units of 6 ECTS.

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  02.12.2023 - 21.12.2023

  Enrollment date range

  15.06.2023 - 01.12.2023

  • 6 credits

  Group(s)

  • MT22D-Å

  Teachers and responsibilities

  Bertel Henriksson

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Onboard Training, Operational Level MO22OT04-3001 04.09.2023-23.09.2023  6 credits  (MT20D-Å) +-
  Competence objectives of the study unit

  The student gets an insight into the tasks in mechanical engineering and safety, which belongs to the studies, these are carried out in a vessel environment or partly in workshop environment.

  Prerequisites

  Onboard Training Support Level

  Content of the study unit

  The supervised onboard training is totally 360 days in order to gain the watchkeeping engineer certificate, of these days can the maximum in the different sub areas be:
  • Machinery over 750 kW, 360 days (support & operational level)
  • Audited school ship, 60 days (support & operational level)
  • Military service, 60 days (operational level)
  • Simulator training, 30 days (operational level)
  • Workshop training, 180 days, can also be training in workshop on shore in the shipping industry (operational level)
  For instance, for a student a typical training can be:
  • Machinery over 750 kW, 30 & 80 days (support & operational level)
  • Audited school ship, 30 & 30 days (support & operational level)
  • Military service, 30 days (operational level)
  • Simulator training, 10 days (operational level)
  • Workshop training, 150 days, can also be training in workshop on shore in the shipping industry (operational level)
  • Totally 360 days (support & operational level)
  There are totally 18 study units (courses) in the curriculum and every study unit is worth 6 ECTS. Every 6 ECTS corresponds to 20 days of training. The training will only be approved in units of 6 ECTS.

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  04.09.2023 - 23.09.2023

  Enrollment date range

  15.06.2023 - 03.09.2023

  • 6 credits

  Group(s)

  • MT20D-Å

  Teachers and responsibilities

  Bertel Henriksson

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Onboard Training, Operational Level MO22OT05-3001 24.09.2023-14.10.2023  6 credits  (MT20D-Å) +-
  Competence objectives of the study unit

  The student gets an insight into the tasks in mechanical engineering and safety, which belongs to the studies, these are carried out in a vessel environment or partly in workshop environment.

  Prerequisites

  Onboard Training Support Level

  Content of the study unit

  The supervised onboard training is totally 360 days in order to gain the watchkeeping engineer certificate, of these days can the maximum in the different sub areas be:
  • Machinery over 750 kW, 360 days (support & operational level)
  • Audited school ship, 60 days (support & operational level)
  • Military service, 60 days (operational level)
  • Simulator training, 30 days (operational level)
  • Workshop training, 180 days, can also be training in workshop on shore in the shipping industry (operational level)
  For instance, for a student a typical training can be:
  • Machinery over 750 kW, 30 & 80 days (support & operational level)
  • Audited school ship, 30 & 30 days (support & operational level)
  • Military service, 30 days (operational level)
  • Simulator training, 10 days (operational level)
  • Workshop training, 150 days, can also be training in workshop on shore in the shipping industry (operational level)
  • Totally 360 days (support & operational level)
  There are totally 18 study units (courses) in the curriculum and every study unit is worth 6 ECTS. Every 6 ECTS corresponds to 20 days of training. The training will only be approved in units of 6 ECTS.

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  24.09.2023 - 14.10.2023

  Enrollment date range

  15.06.2023 - 23.09.2023

  • 6 credits

  Group(s)

  • MT20D-Å

  Teachers and responsibilities

  Bertel Henriksson

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Onboard Training, Operational Level MO22OT06-3001 15.10.2023-03.11.2023  6 credits  (MT20D-Å) +-
  Competence objectives of the study unit

  The student gets an insight into the tasks in mechanical engineering and safety, which belongs to the studies, these are carried out in a vessel environment or partly in workshop environment.

  Prerequisites

  Onboard Training Support Level

  Content of the study unit

  The supervised onboard training is totally 360 days in order to gain the watchkeeping engineer certificate, of these days can the maximum in the different sub areas be:
  • Machinery over 750 kW, 360 days (support & operational level)
  • Audited school ship, 60 days (support & operational level)
  • Military service, 60 days (operational level)
  • Simulator training, 30 days (operational level)
  • Workshop training, 180 days, can also be training in workshop on shore in the shipping industry (operational level)
  For instance, for a student a typical training can be:
  • Machinery over 750 kW, 30 & 80 days (support & operational level)
  • Audited school ship, 30 & 30 days (support & operational level)
  • Military service, 30 days (operational level)
  • Simulator training, 10 days (operational level)
  • Workshop training, 150 days, can also be training in workshop on shore in the shipping industry (operational level)
  • Totally 360 days (support & operational level)
  There are totally 18 study units (courses) in the curriculum and every study unit is worth 6 ECTS. Every 6 ECTS corresponds to 20 days of training. The training will only be approved in units of 6 ECTS.

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  15.10.2023 - 03.11.2023

  Enrollment date range

  15.06.2023 - 14.10.2023

  • 6 credits

  Group(s)

  • MT20D-Å

  Teachers and responsibilities

  Bertel Henriksson

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Onboard Training, Operational Level MO22OT07-3001 04.11.2023-23.11.2023  6 credits  (MT20D-Å) +-
  Competence objectives of the study unit

  The student gets an insight into the tasks in mechanical engineering and safety, which belongs to the studies, these are carried out in a vessel environment or partly in workshop environment.

  Prerequisites

  Onboard Training Support Level

  Content of the study unit

  The supervised onboard training is totally 360 days in order to gain the watchkeeping engineer certificate, of these days can the maximum in the different sub areas be:
  • Machinery over 750 kW, 360 days (support & operational level)
  • Audited school ship, 60 days (support & operational level)
  • Military service, 60 days (operational level)
  • Simulator training, 30 days (operational level)
  • Workshop training, 180 days, can also be training in workshop on shore in the shipping industry (operational level)
  For instance, for a student a typical training can be:
  • Machinery over 750 kW, 30 & 80 days (support & operational level)
  • Audited school ship, 30 & 30 days (support & operational level)
  • Military service, 30 days (operational level)
  • Simulator training, 10 days (operational level)
  • Workshop training, 150 days, can also be training in workshop on shore in the shipping industry (operational level)
  • Totally 360 days (support & operational level)
  There are totally 18 study units (courses) in the curriculum and every study unit is worth 6 ECTS. Every 6 ECTS corresponds to 20 days of training. The training will only be approved in units of 6 ECTS.

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  04.11.2023 - 23.11.2023

  Enrollment date range

  15.06.2023 - 03.11.2023

  • 6 credits

  Group(s)

  • MT20D-Å

  Teachers and responsibilities

  Bertel Henriksson

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Onboard Training, Operational Level MO22OT08-3001 24.11.2023-13.12.2023  6 credits  (MT20D-Å) +-
  Competence objectives of the study unit

  The student gets an insight into the tasks in mechanical engineering and safety, which belongs to the studies, these are carried out in a vessel environment or partly in workshop environment.

  Prerequisites

  Onboard Training Support Level

  Content of the study unit

  The supervised onboard training is totally 360 days in order to gain the watchkeeping engineer certificate, of these days can the maximum in the different sub areas be:
  • Machinery over 750 kW, 360 days (support & operational level)
  • Audited school ship, 60 days (support & operational level)
  • Military service, 60 days (operational level)
  • Simulator training, 30 days (operational level)
  • Workshop training, 180 days, can also be training in workshop on shore in the shipping industry (operational level)
  For instance, for a student a typical training can be:
  • Machinery over 750 kW, 30 & 80 days (support & operational level)
  • Audited school ship, 30 & 30 days (support & operational level)
  • Military service, 30 days (operational level)
  • Simulator training, 10 days (operational level)
  • Workshop training, 150 days, can also be training in workshop on shore in the shipping industry (operational level)
  • Totally 360 days (support & operational level)
  There are totally 18 study units (courses) in the curriculum and every study unit is worth 6 ECTS. Every 6 ECTS corresponds to 20 days of training. The training will only be approved in units of 6 ECTS.

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  24.11.2023 - 13.12.2023

  Enrollment date range

  15.06.2023 - 23.11.2023

  • 6 credits

  Group(s)

  • MT20D-Å

  Teachers and responsibilities

  Bertel Henriksson

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   PLC programming and Control Devices MO22M204-3001 04.09.2023-20.11.2023  3 credits  (MT21D-Å) +-
  Competence objectives of the study unit

  STCW- Code: Table AIII/2
  
  The student:
  • has theoretical knowledge of managing control equipment for safety devices
  • has theoretical knowledge of managing control systems for main engine, generator and distribution systems and steam boilers
  • has theoretical knowledge of design features and system configuration of control systems for electrical motors and high voltage installations
  • has theoretical knowledge of control of hydraulic control equipment
  • has practical knowledge function test of control equipment and safety devices
  • has practical knowledge of troubleshooting control devices and monitoring systems
  • has practical knowledge of software version control

  Prerequisites

  Operational level studies

  Content of the study unit

  • PLC programming
  • Control of safety devices

  ---

  Person(s) in charge

  Kaj Rintanen

  Mode of delivery

  34% Face-to-face, 66% Distance learning

  Learning material

  More information on ItsLearning

  Learning methods

  Lectures
  Homework

  Objects, timing and methods of assessment

  Passed exam and home assignment

  Teaching language

  English

  Timing

  04.09.2023 - 20.11.2023

  Enrollment date range

  15.06.2023 - 03.09.2023

  • 3 credits

  Group(s)

  • MT21D-Å

  Teachers and responsibilities

  Katarina Sandström

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Share of online studies

  2 credits

  Assessment scale

  H-5

  Exam dates and retake possibilities

  Online exam
  Home assignment

  Assessment criteria

  Less than 45% correct on exam and assignment

  Assessment criteria – satisfactory (1-2)

  Between 45%-65% correct in exams and assignment

  Assessment criteria – good (3-4)

  Between 65%-90% correct in exam and assignment

  Assessment criteria – excellent (5)

  More than 90% correct in exam and assignment

•   Physics 1 MO22CN07-3002 02.10.2023-20.11.2023  1 credits  (MT23D-Å) +-
  Competence objectives of the study unit

  To provide the student with good skills in the subject of physics for further studies at the university of applied sciences level.

  Prerequisites

  Mathematics 2

  Content of the study unit

  • quantities, units and computation rules
  • rectilinear and rotational movement, mass and force
  • friction
  • work, energy and power
  • hydrostatics
  • hydrodynamics

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  02.10.2023 - 20.11.2023

  Enrollment date range

  15.06.2023 - 01.10.2023

  • 1 credits

  Group(s)

  • MT23D-Å

  Teachers and responsibilities

  Esa Lapela, Katarina Sandström

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Physics 2 MO22CN08-3002 23.10.2023-03.12.2023  2 credits  (MT23D-Å) +-
  Competence objectives of the study unit

  To provide the student with good skills in the subject of physics for further studies at the university of applied sciences level.

  Prerequisites

  Physics 1

  Content of the study unit

  • vectors
  • statics
  • moment, moment of inertia and centre of gravity calculations
  • mechanics of materials

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  23.10.2023 - 03.12.2023

  Enrollment date range

  15.06.2023 - 22.10.2023

  • 2 credits

  Group(s)

  • MT23D-Å

  Teachers and responsibilities

  Esa Lapela, Katarina Sandström

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Physics 3 MO22CN09-3002 18.03.2024-28.03.2024  2 credits  (MT23D-Å) +-
  Competence objectives of the study unit

  The student has good skills in the subject of physics for further studies at the university of applied sciences level.

  Prerequisites

  Physics 1

  Content of the study unit

  • gas statics
  • gas laws
  • temperature scales
  • heat theory

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  18.03.2024 - 28.03.2024

  Enrollment date range

  02.12.2023 - 17.03.2024

  • 2 credits

  Group(s)

  • MT23D-Å

  Teachers and responsibilities

  Katarina Sandström

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Physics 4 MO22CN10-3002 08.01.2024-01.03.2024  2.5 credits  (MT23D-Å) +-
  Competence objectives of the study unit

  To provide the student with knowledge of direct-current and alternating current theory and semi-conductors.

  Prerequisites

  Physics 3

  Content of the study unit

  • Direct-current theory
  • Basic concepts
  • Ohms law
  • Power and energy
  • Electric fields, condensers, magnetism, coils.
  • Alternating current theory
  • Alternating current and alternating tension
  • Reactance and impedance
  • Resonance circuits
  • Semi-conductors
  • Diode and transistor
  • Amplifying circuits
  • Oscillatory circuits

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  08.01.2024 - 01.03.2024

  Enrollment date range

  02.12.2023 - 15.01.2024

  • 2.5 credits

  Group(s)

  • MT23D-Å

  Teachers and responsibilities

  Esa Lapela

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Professional English A MO22CL02-3002 13.11.2023-20.12.2023  1.5 credits  (MT23D-Å) +-
  Competence objectives of the study unit

  The student knows basic practical Maritime English. The active vocabulary, with the emphasis onboard communication, is expanded. Emphasis on practical Maritime English.

  Prerequisites

  Professional English 1

  Content of the study unit

  Standard Marine Communication Phrases (SMCP) 2.
  • Part 4, Ch. A - Operative Ship handling.
  • Part 4.3. (Ch. A) - Wheel-orders, handover of watch.
  • Part 3.4 - Pilotage.
  • Charts and related publications. (Pilot Books) Guide to Port Entry, Harbour Bye-Laws
  • Manuals

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  13.11.2023 - 20.12.2023

  Enrollment date range

  15.06.2023 - 12.11.2023

  • 1.5 credits

  Group(s)

  • MT23D-Å

  Teachers and responsibilities

  Peter Björkroth

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Professional English C MO22CL01-3002 13.11.2023-20.12.2023  2 credits  (MT23D-Å) +-
  Competence objectives of the study unit

  STCW-Code AIII/1
  The student is able to manage the officer’s duties in connection with different emergency situations and safety exercises and drills in English.

  Prerequisites

  Safety for Officers
  Medical Care 2

  Content of the study unit

  • Background: SMCP: GMDSS procedures (Appendix), Part 4 Ch. B, Ch. D. Distress Traffic on the radio (GMDSS) Parts 3.1 (Distress Communications), 3.2 (Urgency Communications). SMCP: Part 3.6 - VTS Standard Phrases (Message Markers)
  • Medical English (Radio Medical - Services).
  • Practical exercises/presentations in having life-boat drills, instructing how to use a life-jacket, realising man-over-board drills, describing evacuation routes and giving other instructions when evacuating the vessel.

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  13.11.2023 - 20.12.2023

  Enrollment date range

  15.06.2023 - 12.11.2024

  • 2 credits

  Group(s)

  • MT23D-Å

  Teachers and responsibilities

  Peter Björkroth

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Pumps and Pipes MO22O105-3001 29.01.2024-01.03.2024  1.5 credits  (MT22D-Å) +-
  Competence objectives of the study unit

  STCW-Code:Table A-III/1
  Students:
  are expected to have knowledge of different pump types, flow losses, practical use of pump and system curves.
  are also able to choose the correct pump type and pipe dimension.

  Prerequisites

  Piping Diagrams

  Content of the study unit

  • Pipe diagram/drawings
  • Fixtures
  • Interconnects
  • Suspension
  • Marking
  • Material
  • Pump types
  • Pump Characteristics
  • Dimensioning
  • Installation
  • Maintenance
  • Regulation

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  29.01.2024 - 01.03.2024

  Enrollment date range

  01.12.2023 - 28.01.2024

  • 1.5 credits

  Group(s)

  • MT22D-Å

  Teachers and responsibilities

  Esa Lapela

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Research Methodology MO22CG04-3001 02.02.2024-30.06.2024  1.5 credits  (MT21D-Å) +-
  Competence objectives of the study unit

  The student
  • can conform to the research process systematically and flexibly in the degree project process and in other projects.
  • can conform to research ethics in the research process
  • understands and conforms to qualitative and quantitative methods.
  • is able to review and analyse scientific text and see the connection between research and practical operations.
  • is able to avail evidence based knowledge.
  • is able to respond to and make relevant questions.

  Prerequisites

  None

  Content of the study unit

  • Fundamental principles and definitions of research methodology
  • Different parts of the research process
  • Quantitative and qualitative approaches
  • Research ethics
  • Starting one’s own research or development work process in the professional field in question

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  02.02.2024 - 30.06.2024

  Enrollment date range

  03.01.2024 - 01.02.2024

  • 1.5 credits

  Group(s)

  • MT21D-Å

  Teachers and responsibilities

  Peter Björkroth, Katarina Sandström

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   SSO (Ship Security Officer) MO22O407-3001 09.10.2023-13.11.2023  0.75 credits  (MT22D-Å) +-
  Competence objectives of the study unit

  As specified in STCW-Code: A-VI/5 A-III/I
  The student:
  has the skills and knowledge required of a Ship Security Officer.
  has theoretical and practical knowledge and skills to manage the systems and complex of problems in connection with this special area.

  Prerequisites

  None

  Content of the study unit

  • the ISPS Code, its background, objectives and structure
  • security structures and principles
  • security related division of responsibilities
  • the security assessment of a vessel
  • security related control devices
  • ship security plan
  • threats – identifying and detecting them, measures to be taken
  • security measures onboard a vessel
  • preparedness for emergency situations, education, training and drills
  • security administration and security training

  Further information

  Course for Ship Security Officer
  
  
  The course has been designed in accordance with the STCW Convention regulation VI/5 and the STCW Code section A-VI/5, the framework given in the IMO Model Course “Ship Security Officer” and the requirements given in the ISPS Code, part A, paragraph 13.2, and part B, paragraphs 13.1, 13.2 and 18.1. This course also fulfils the requirements set out for Company Security Officer and Port Facility Security Officer. The course has comprised a total of 24 hours of instruction and practical exercises.

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  09.10.2023 - 13.11.2023

  Enrollment date range

  15.06.2023 - 12.11.2023

  • 0.75 credits

  Group(s)

  • MT22D-Å

  Teachers and responsibilities

  Ahti Hyppönen

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Safety Management MO15M403-3001 29.01.2024-22.03.2024  1.5 credits  (MT20D-Å) +-
  Competence objectives of the study unit

  STCW- Code: Table A-II/2 A-III/2;
  The student is able to maintain safety and security of the ship’s crew and passengers and the operational condition of life saving, fire fighting and other safety systems.
  The student is provided with skills to develop emergency and damage control plans and handle emergency situations.
  The requirements set in the STCW Convention with reference to the training in maritime and ship safety for the Management Level, STCW A-II/ 2., as applicable, are fulfilled. The student is provided with knowledge and skills required to handle the management of safety related tasks onboard both in normal operations and in crisis situations.

  Prerequisites

  Safety for officers
  ISM
  Environmental protection

  Content of the study unit

  • The safety related responsibilities and duties of the master. The STCW Convention requirements.
  • Rescue organizations and plans. The IAMSAR-manual
  • Vessel accidents. The master’s role.
  • Safety onboard. SOLAS. MARPOL. ISM. National requirements and exceptions.
  • Certificates and inspections. SOLAS requirements concerning the vessel’s safety equipment, its maintenance and usage training.
  • Principles for onboard operations in connection with different kinds of accidents.
  • Emergency plans, contingency plans, safety drawings, priorities, resources allocation, damage control, follow up, documentation.
  • The vessel’s construction safety
  • Drawing up of emergency, contingency, drill, safety training and damage control plans; alarm-lists, check-lists and training manuals.
  • Alarm organization onboard. Safety information. Leadership in crisis situations.
  • Cooperation with rescue helicopters.
  • Mental reactions. Leadership in emergency situations.
  • Communications during crisis; objectives and means, principles for media contacts.
  • Practical exercises
  • Exercises using safety equipment onboard. Risks and limitations.
  • Assessment of the capacity of the life-saving equipment.
  • Equipment onboard life rafts and lifeboats. Exercises in group.
  • Exercises using emergency signals.
  • CCM

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  29.01.2024 - 22.03.2024

  Enrollment date range

  01.12.2023 - 28.01.2024

  • 1.5 credits

  Group(s)

  • MT20D-Å

  Teachers and responsibilities

  Virtual Engine 4

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Safety Management MO22M403-3001 31.12.2023-01.06.2024  1.5 credits  (MT21D-Å) +-
  Competence objectives of the study unit

  STCW- Code: Table A-II/2 A-III/2;
  The student is able to maintain safety and security of the ship’s crew and passengers and the operational condition of life saving, fire fighting and other safety systems.
  The student is provided with skills to develop emergency and damage control plans and handle emergency situations.
  The requirements set in the STCW Convention with reference to the training in maritime and ship safety for the Management Level, STCW A-II/ 2., as applicable, are fulfilled. The student is provided with knowledge and skills required to handle the management of safety related tasks onboard both in normal operations and in crisis situations.

  Prerequisites

  Safety for officers
  ISM
  Environmental protection

  Content of the study unit

  • The safety related responsibilities and duties of the master. The STCW Convention requirements.
  • Rescue organizations and plans. The IAMSAR-manual
  • Vessel accidents. The master’s role.
  • Safety onboard. SOLAS. MARPOL. ISM. National requirements and exceptions.
  • Certificates and inspections. SOLAS requirements concerning the vessel’s safety equipment, its maintenance and usage training.
  • Principles for onboard operations in connection with different kinds of accidents.
  • Emergency plans, contingency plans, safety drawings, priorities, resources allocation, damage control, follow up, documentation.
  • The vessel’s construction safety
  • Drawing up of emergency, contingency, drill, safety training and damage control plans; alarm-lists, check-lists and training manuals.
  • Alarm organization onboard. Safety information. Leadership in crisis situations.
  • Cooperation with rescue helicopters.
  • Mental reactions. Leadership in emergency situations.
  • Communications during crisis; objectives and means, principles for media contacts.
  • Practical exercises
  • Exercises using safety equipment onboard. Risks and limitations.
  • Assessment of the capacity of the life-saving equipment.
  • Equipment onboard life rafts and lifeboats. Exercises in group.
  • Exercises using emergency signals.
  • CCM

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  31.12.2023 - 01.06.2024

  Enrollment date range

  02.07.2023 - 18.02.2024

  • 1.5 credits

  Group(s)

  • MT21D-Å

  Teachers and responsibilities

  Ahti Hyppönen

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Safety for Officers (incl. CCM) MO22O404-3001 09.10.2023-13.11.2023  2 credits  (MT22D-Å) +-
  Competence objectives of the study unit

  To fulfill the requirements set in the STCW Convention with reference to the training in maritime and ship safety for the Management Level. STCW A-III/2

  Prerequisites

  Basic Safety

  Content of the study unit

  • The safety related responsibilities and duties of officers. The STCW Convention requirements
  • Rescue organizations and plans
  • The IAMSAR-manual
  • Vessel accidents. Immediate action after grounding. Typical examples, causes and consequences. The human factor.
  • Damage assessment and damage control
  • Survival techniques
  • Hypothermia
  • The duties and responsibilities of fleet commanders and vessel masters. Safety related work onboard. Regulations, legislators and supervision. Alarm organization onboard.
  • Cooperation with rescue helicopters
  • Mental preparedness. Catastrophe psychology.
  • Safety planning onboard. Assessment of the vessel’s state of readiness.
  • CCM
  • Practical exercises:
  • Exercises wearing safety equipment
  • Exercises using emergency signals
  • Exercises in arranging and having drills onboard

  Further information

  Crisis Management and Human Behaviour
  
  
  The course has been designed in accordance with the framework given in the STCW A-V/2.4 and has comprised a total of 8 hours of instructions and exercises

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  09.10.2023 - 13.11.2023

  Enrollment date range

  15.06.2023 - 08.10.2023

  • 2 credits

  Group(s)

  • MT22D-Å

  Teachers and responsibilities

  Ahti Hyppönen

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Ship Machinery MO22O104-3002 23.10.2023-24.12.2023  4.5 credits  (MT22D-Å) +-
  Competence objectives of the study unit

  STCW-Code: Table A-III/1
  Students:
  master the structure and function of the machinery units in a vessel as well as alternative solutions and their characteristics.
  are familiar with operating economics, maintenance, flag State and classification society rules.

  Prerequisites

  Ship diesel engine 1

  Content of the study unit

  • Various types of main machinery and configurations as well as their impact on building and operating economics
  • Impact of the hull resistance overall
  • Controllable pitch propeller structure and function
  • Shaft line and its components
  • Electricity production/generation
  • Heat production/generation
  • Deck machinery and cargo handling equipment
  • Sanitation and freshwater production
  • Ship maintenance and docking
  • The classification society rules

  ---

  Mode of delivery

  Face-to-face

  Learning methods

  Lectures and projects Written exam.

  Teaching language

  English

  Timing

  23.10.2023 - 24.12.2023

  Enrollment date range

  15.06.2023 - 22.10.2023

  • 4.5 credits

  Group(s)

  • MT22D-Å

  Teachers and responsibilities

  Bertel Henriksson

  Additional information

  Written exam., approved simulation and laboration. Part of the course will be held at the schools engine laboratory in Parainen. Safety shoos will be needed. Compulsory attendance on engine laboration and simulations.

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Ship Maintenance and Seamanship 1, Workshop MO22S07-3002 11.03.2024-31.05.2024  1.5 credits  (MT23D-Å) +-
  Competence objectives of the study unit

  STCW- Code: Table A-II/4
  STCW-Code:Table A-VI/1-4
  STCW-Code:Table A-III/5
  
  The student
  • knows the basics in ship maintenance
  • knows the handling, storing, overhauling and maintaining of ropes, hawsers and cables, and is aware of the breaking load of the ropes.
  • is familiar with the securing of equipment and necessities.
  • is familiar with the waste disposal management onboard.
  • learns to observe safe occupational protection routines.
  • has thorough knowledge of the objectives of environmental protection and occupational welfare.

  Prerequisites

  None

  Content of the study unit

  • Basics in ship maintenance
  • Securing of equipment
  • Mooring, mooring equipment
  • The basic knots, the structure of ropes and hawsers, splicing, whipping and seizing, and the structure, handling and maintenance of a cable
  • Occupational safety and environmental protection onboard
  • Waste disposal management

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  11.03.2024 - 31.05.2024

  Enrollment date range

  02.12.2023 - 11.02.2024

  • 1.5 credits

  Group(s)

  • MT23D-Å

  Teachers and responsibilities

  Lasse Lusto

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Ship Maintenance and Seamanship 1, Workshop MO20S07GMC-3002 10.10.2023-30.12.2023  1.5 credits +-
  Competence objectives of the study unit

  STCW- Code: Table A-II/4
  STCW-Code:Table A-VI/1-4
  STCW-Code:Table A-III/5
  
  The student
  • knows the basics in ship maintenance
  • knows the handling, storing, overhauling and maintaining of ropes, hawsers and cables, and is aware of the breaking load of the ropes.
  • is familiar with the securing of equipment and necessities.
  • is familiar with the waste disposal management onboard.
  • learns to observe safe occupational protection routines.
  • has thorough knowledge of the objectives of environmental protection and occupational welfare.

  Prerequisites

  None

  Content of the study unit

  • Basics in ship maintenance
  • Securing of equipment
  • Mooring, mooring equipment
  • The basic knots, the structure of ropes and hawsers, splicing, whipping and seizing, and the structure, handling and maintenance of a cable
  • Occupational safety and environmental protection onboard
  • Waste disposal management

  ---

  Person(s) in charge

  Tony Karlsson

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  10.10.2023 - 30.12.2023

  Enrollment date range

  10.09.2023 - 09.10.2023

  • 1.5 credits

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Campus

  Åbo, Hertig Johans parkgata 21

  Assessment scale

  H-5

•   Ship Maintenance and Seamanship 2, Corrosion MO22S08-3002 11.03.2024-31.05.2024  1 credits  (MT23D-Å) +-
  Competence objectives of the study unit

  STCW- Code: Table A-II/4
  STCW-Code:Table A-VI/1-4
  STCW-Code:Table A-III/5
  
  The student
  • has thorough knowledge of the objectives of ship maintenance and protection against corrosion.
  • is familiar with the corrosion process and protection against corrosion.
  • is familiar with the cleaning methods and agents.
  • learns to observe safe occupational safety routines.
  • has thorough knowledge of the objectives of environmental protection and occupational welfare.

  Prerequisites

  None

  Content of the study unit

  • Ship maintenance and protection against corrosion
  • Cleaning and preparation of surfaces to be painted and painting works and colours
  • Cleaning methods, cleaning agents and other chemicals - their characteristics and safe and environmentally sound methods of application.
  • Occupational safety and environmental protection onboard

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  11.03.2024 - 31.05.2024

  Enrollment date range

  02.12.2023 - 11.02.2024

  • 1 credits

  Group(s)

  • MT23D-Å

  Teachers and responsibilities

  Lasse Lusto

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Ship Maintenance and Seamanship 2, Corrosion MO20S08GMC-3003 10.10.2023-30.12.2023  1 credits +-
  Competence objectives of the study unit

  STCW- Code: Table A-II/4
  STCW-Code:Table A-VI/1-4
  STCW-Code:Table A-III/5
  
  The student
  • has thorough knowledge of the objectives of ship maintenance and protection against corrosion.
  • is familiar with the corrosion process and protection against corrosion.
  • is familiar with the cleaning methods and agents.
  • learns to observe safe occupational safety routines.
  • has thorough knowledge of the objectives of environmental protection and occupational welfare.

  Prerequisites

  None

  Content of the study unit

  • Ship maintenance and protection against corrosion
  • Cleaning and preparation of surfaces to be painted and painting works and colours
  • Cleaning methods, cleaning agents and other chemicals - their characteristics and safe and environmentally sound methods of application.
  • Occupational safety and environmental protection onboard

  ---

  Person(s) in charge

  Tony Karlsson

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  10.10.2023 - 30.12.2023

  Enrollment date range

  10.09.2023 - 09.10.2023

  • 1 credits

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Campus

  Åbo, Hertig Johans parkgata 21

  Assessment scale

  H-5

•   Ship Maintenance and Seamanship 3, Deck Machinery MO22S09-3002 11.03.2024-31.05.2024  1 credits  (MT23D-Å) +-
  Competence objectives of the study unit

  STCW- Code: Table A-III/5
  The student
  • has thorough knowledge of deck machinery, its construction, usage and maintenance.
  • knows the maintenance of cargo handling equipment and lifting devices.
  • learns to observe safe occupational safety routines.
  • has thorough knowledge of the objectives of environmental protection and occupational welfare.

  Prerequisites

  None

  Content of the study unit

  • Deck machinery, its characteristics and safe methods of application
  • Maintenance of deck machinery
  • Maintenance of cargo handling gear, ramps, hatches, lifts and lifting devices
  • Lubricants
  • Maintenance program and planning
  • Occupational safety and environmental protection onboard

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  11.03.2024 - 31.05.2024

  Enrollment date range

  02.12.2023 - 11.02.2024

  • 1 credits

  Group(s)

  • MT23D-Å

  Teachers and responsibilities

  Lasse Lusto

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Ship Maintenance and Seamanship 3, Deck Machinery MO20S09GMC-3002 10.10.2023-30.12.2023  1 credits +-
  Competence objectives of the study unit

  STCW- Code: Table A-III/5
  The student
  • has thorough knowledge of deck machinery, its construction, usage and maintenance.
  • knows the maintenance of cargo handling equipment and lifting devices.
  • learns to observe safe occupational safety routines.
  • has thorough knowledge of the objectives of environmental protection and occupational welfare.

  Prerequisites

  None

  Content of the study unit

  • Deck machinery, its characteristics and safe methods of application
  • Maintenance of deck machinery
  • Maintenance of cargo handling gear, ramps, hatches, lifts and lifting devices
  • Lubricants
  • Maintenance program and planning
  • Occupational safety and environmental protection onboard

  ---

  Person(s) in charge

  Tony Karlsson

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  10.10.2023 - 30.12.2023

  Enrollment date range

  10.09.2023 - 09.10.2023

  • 1 credits

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Campus

  Åbo, Hertig Johans parkgata 21

  Assessment scale

  H-5

•   Ship Theory MO22O308-3002 26.02.2024-10.05.2024  1.75 credits  (MT23D-Å) +-
  Competence objectives of the study unit

  STCW-Code:Table A-III/1
  The student:
  • has knowledge of vessel types, dimensions, ship drawings, hull structure, ship stability, corrosion, hull maintenance, breakdowns, international regulations, fire protection, main and auxiliary machinery types.

  Prerequisites

  None

  Content of the study unit

  • Ship Types
  • The vessel's main dimensions and deadweight
  • Vessel Drawings
  • The structure and load of the hull
  • Hull breakdowns and factors that weaken the hull
  • Corrosion, corrosion protection and hull maintenance
  • Ship stability and stability factors
  • Power requirements and methods for calculating drag resistance
  • Main and the auxiliary engine types and their characteristics
  • International regulations, IMO, SOLAS, MARPOL
  • Fire protection, fire detection/isolation and fire construction
  • Tanker types and the most important characteristics of different loads

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  26.02.2024 - 10.05.2024

  Enrollment date range

  02.12.2023 - 25.02.2024

  • 1.75 credits

  Group(s)

  • MT23D-Å

  Teachers and responsibilities

  Thomas Lundberg

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Ship Types and Cargo Handling MO22S05-3002 04.09.2023-08.10.2023  1.5 credits  (MT23D-Å) +-
  Competence objectives of the study unit

  STCW- Code: Table A-II/4 A-III/5
  The student
  • knows how to make the vessel ready for sea and duties in port in connection with loading and discharging, cargo handling and handling of hazardous cargoes.
  • knows the structure of a merchant ship and the most common vessel terms.
  • has thorough knowledge of the objectives of environmental protection and occupational welfare.
  • knows the characteristics and functioning of mooring equipment and lifting devices and cargo securing methods
  • knowledge of procedures for safe handling, stowage and securing of stores

  Prerequisites

  None

  Content of the study unit

  • Different vessel types, their areas of usage
  • Ship construction, the names of various vessel parts and their use
  • Vessel equipment, main dimensions and form, load lines and markings for draught (draught-marks)
  • Handling and securing of general cargoes
  • Handling of dangerous goods according to the IMDG Code and the risks connected with hazardous cargoes
  • Environmental protection and occupational welfare
  • The vessel’s mooring equipment, lifting devices and cargo securing methods
  • can perform duties of a watchman safely in connection with loading and discharging

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  04.09.2023 - 08.10.2023

  Enrollment date range

  15.06.2023 - 03.09.2023

  • 1.5 credits

  Group(s)

  • MT23D-Å

  Teachers and responsibilities

  Tony Karlsson

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Ship Types and Cargo Handling MO21S20GMC-3002 10.10.2023-30.12.2023  1 credits +-
  Competence objectives of the study unit

  STCW- Code: Table A-II/4 A-III/5
  The student
  • knows how to make the vessel ready for sea and duties in port in connection with loading and discharging, cargo handling and handling of hazardous cargoes.
  • knows the structure of a merchant ship and the most common vessel terms.
  • has thorough knowledge of the objectives of environmental protection and occupational welfare.
  • knows the characteristics and functioning of mooring equipment and lifting devices and cargo securing methods
  • knowledge of procedures for safe handling, stowage and securing of stores

  Prerequisites

  None

  Content of the study unit

  • Different vessel types, their areas of usage
  • Ship construction, the names of various vessel parts and their use
  • Vessel equipment, main dimensions and form, load lines and markings for draught (draught-marks)
  • Handling and securing of general cargoes
  • Handling of dangerous goods according to the IMDG Code and the risks connected with hazardous cargoes
  • Environmental protection and occupational welfare
  • The vessel’s mooring equipment, lifting devices and cargo securing methods
  • can perform duties of a watchman safely in connection with loading and discharging

  ---

  Person(s) in charge

  Tony Karlsson

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  10.10.2023 - 30.12.2023

  Enrollment date range

  10.09.2023 - 09.10.2023

  • 1 credits

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Campus

  Åbo, Hertig Johans parkgata 21

  Assessment scale

  H-5

•   Ships Machinery MO22S04-3002 18.10.2023-20.11.2023  1 credits  (MT23D-Å) +-
  Competence objectives of the study unit

  STCW- Code: Table A-III/5
  The student
  • knows the main parts of the diesel engine and its purpose.
  • knows the different fields of application of diesel engines.
  • knows the environmental effects of diesel engines.
  • realizes the importance of maintenance for safe navigation and minimized environmental consequences.

  Prerequisites

  None

  Content of the study unit

  • the most important parts of a diesel engine and their functioning mechanisms
  • fuels
  • lubricating oils
  • cooling water
  • starting air
  • maintenance and overhaul of a diesel engine
  • the effects of a diesel engine on the environment
  • occupational safety

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  18.10.2023 - 20.11.2023

  Enrollment date range

  15.06.2023 - 17.10.2023

  • 1 credits

  Group(s)

  • MT23D-Å

  Teachers and responsibilities

  Thomas Lundberg

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Ships Machinery MO21S19GMC-3002 10.10.2023-30.12.2023  1.5 credits +-
  Competence objectives of the study unit

  STCW- Code: Table A-III/5
  The student
  • knows the main parts of the diesel engine and its purpose.
  • knows the different fields of application of diesel engines.
  • knows the environmental effects of diesel engines.
  • realizes the importance of maintenance for safe navigation and minimized environmental consequences.

  Prerequisites

  None

  Content of the study unit

  • the most important parts of a diesel engine and their functioning mechanisms
  • fuels
  • lubricating oils
  • cooling water
  • starting air
  • maintenance and overhaul of a diesel engine
  • the effects of a diesel engine on the environment
  • occupational safety

  ---

  Person(s) in charge

  Tony Karlsson

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  10.10.2023 - 30.12.2023

  Enrollment date range

  10.09.2023 - 09.10.2023

  • 1.5 credits

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Campus

  Åbo, Hertig Johans parkgata 21

  Assessment scale

  H-5

•   Steam Boilers and Turbines MO22O103-3002 18.09.2023-06.11.2023  3 credits  (MT22D-Å) +-
  Competence objectives of the study unit

  STCW-Code: Table A-III/1
  Students:
  • are able to take responsibility for the operation of steam facilities on the ship.
  • know the operating process of the boiler and steam turbines.

  Prerequisites

  None

  Content of the study unit

  • Steam techniques, basics
  • Heat transfer, heat exchanger
  • Efficiencies
  • The steam boiler's operating principle
  • Steam boiler types and peripherals
  • Control system and safety equipment
  • Water Treatment
  • Combustion and fuels
  • Corrosion and contamination of heating surfaces
  • Environmental impact and exhaust emissions
  • The requirements of the classification society
  • General turbine description
  • Turbine Details
  • Steam turbine regulations and safety systems
  • Operation and maintenance of steam turbines

  ---

  Mode of delivery

  Face-to-face

  Learning methods

  Lectures and projects

  Teaching language

  English

  Timing

  18.09.2023 - 06.11.2023

  Enrollment date range

  15.06.2023 - 17.09.2023

  • 3 credits

  Group(s)

  • MT22D-Å

  Teachers and responsibilities

  Bertel Henriksson

  Additional information

  Lecture on campus. Written exam.

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Survival Craft and Resque Boat MO22S17-3002 25.03.2024-28.03.2024  1 credits  (MT23D-Å) +-
  Competence objectives of the study unit

  The student is provided with the skills and knowledge needed for the issuance of the certificate Course in Survival Crafts and Rescue Boats other than Fast Rescue Boats in accordance with STCW-Code: A-VI/2–1, A-III/4, A-III/5.

  Prerequisites

  None

  Content of the study unit

  Certificate for Survival Crafts and RescueBoats other than Fast Rescue Boats in accordance with STCW-Code:A-VI/2 –1.

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  25.03.2024 - 28.03.2024

  Enrollment date range

  02.12.2023 - 14.02.2024

  • 1 credits

  Group(s)

  • MT23D-Å

  Teachers and responsibilities

  Virtual Meriturva

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Sustainable Development MO22CG03-3002 06.11.2023-10.12.2023  1.5 credits  (MT22D-Å) +-
  Competence objectives of the study unit

  Student:
  • understand sustainable issues in the shipping industry
  • know the regulations and the future

  Prerequisites

  None

  Content of the study unit

  • Sustainable issues today and the role of shipping
  • Regulations and the future
  • Technical solutions

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  06.11.2023 - 10.12.2023

  Enrollment date range

  15.06.2023 - 05.11.2023

  • 1.5 credits

  Group(s)

  • MT22D-Å

  Teachers and responsibilities

  Ossi Westilä

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Swedish in Working Life VAL23090-3001 06.12.2023-30.06.2024  3 credits  (SFK22D-Å, ...) +-
  Competence objectives of the study unit

  Studerande
  - Klarar av att presentera sin utbildning, sin arbetslivserfarenhet och sitt kunnande.
  - Klarar av att berätta om sin arbetsmiljö.
  - Behärskar den centrala terminologin inom sin bransch.
  - Ska uppvisa sådana kunskaper som enligt lagen krävs av offentligt anställda, och som behövs med tanken på studerandens yrkesövning och professionella tillväxt. Detta innebär att studerande bör visa nöjaktig (vitsordet 1, 2, 3) eller god (vitsordet 4 eller 5) förmåga att använda svenska i tal och skrift. Muntlig och skriftlig förmåga bedöms skilt. (not translated)

  Prerequisites

  Inga förkunskapskrav (not translated)

  Content of the study unit

  I STUDIER
  - YH-studier och egen bransch
  - Yrkesbild och yrkesidentitet
  - Kärnkompetenser
  
  II ANSÖKNINGSPROCESS
  - Arbetslivets terminologi
  - Video-CV
  
  III ARBETSPLATSKOMMUNIKATION & BRANSCHINRIKTAD TERMINOLOGI
  - Yrkesrelaterat språk och kommunikation inom egen bransch
  - Arbetslivets texter och dokument (not translated)

  ---

  Person(s) in charge

  Marika Rask

  Mode of delivery

  Face-to-face

  Learning material

  Studiematerialet finns till största delen på kursens Moodle-sida. (not translated)

  Learning methods

  Självständigt arbete, par- och grupparbeten, smågruppsdiskussioner, muntliga och skriftliga övningar, textbearbetning samt inlämningsuppgifter. (not translated)

  Objects, timing and methods of assessment

  Kursen bedöms utifrån den studerandes prestationer under kursens gång.
  Bedömningen baserar sig på par- och grupparbeten, smågruppsdiskussioner, muntliga och skriftliga övningar, textbearbetning samt inlämningsuppgifter. Kursen kräver aktiv insats under lektioner och har obligatorisk närvaro. Frånvaro påverkar kursvitsordet negativt.
  
  Studerande ska uppvisa sådana kunskaper i svenska som enligt lagen (424/2003) krävs av offentligt anställda. Detta innebär att studerande bör visa nöjaktig (vitsordet 1, 2 eller 3) eller god (vitsordet 4 eller 5) förmåga att använda finska i tal och skrift. (not translated)

  Teaching language

  Swedish

  Timing

  06.12.2023 - 30.06.2024

  Enrollment date range

  06.11.2023 - 11.02.2024

  • 3 credits

  Group(s)

  • SFK22D-Å
  • SFK23D-Å
  • MT22D-Å
  • SFK21D-Å
  • MT21D-Å
  • MMC22D-Å
  • MMC23D-Å
  • MT23D-Å
  • MMC21D-Å

  Teachers and responsibilities

  Peter Björkroth, Marika Rask

  Degree Programme(s)

  Degree Programme in Maritime Technology, Degree Programme in Maritime Management, Captain, Degree Programme in Maritime Studies

  Assessment scale

  Approved/Rejected

  Exam dates and retake possibilities

  Vecka 7 tisdag 13.2 kl 14-17
  Möjlighet att avlägga tentamen i muntlig och skriftlig färdighet ("Lilla svenska språkprovet"):
  Tillfället är avsett för så kallade validerare.
  
  Kurstentamen mån 22.4 kl 9-12 ("Lilla svenska språkprovet") (not translated)

  Student's schedule and workload

  28 Kontakttimmar
  12 Skriftliga uppgifter
  30 Självstudier
  10 Muntlig presentation (not translated)

  Assessment criteria

  Approved / Failed

  MUNTLIGA FÄRDIGHETER
  Klarar sig nöjaktigt i alldagliga språksituationer i arbetslivet. Klarar av att förmedla ett budskap även om kommunikationen är långsam och inexakt och kan kräva ansträngning av bägge samtalsparterna.
  
  Interaktionsförmåga: Klarar enkel kommunikation och kan ta initiativ i bekanta situationer. Behöver ibland stöd av samtalsparten.
  
  Ordförråd: Behärskar det branschspecifika och allmänna ordförrådet nöjaktigt. Ordförrådets otillräcklighet samt felen i ordval begränsar kommunikationen. Förmågan att använda ersättande uttryck är bristfällig.
  
  Strukturer: Använder enkla, vanliga grundkonstruktioner någorlunda rätt. Mera krävande konstruktioner vållar svårigheter.
  Tydlig och delvis störande inverkan av andra språk finns.
  
  Uttal: Uttalet är inexakt men i huvudsak begripligt. Inverkan av andra språk är tydlig.
  
  SKRIFTLIGA FÄRDIGHETER
  Den studerande:
  - klarar sig nöjaktigt i förutsägbara yrkesmässiga och branschspecifika språksituationer.
  - kan skriva en enkel sammanhängande text. Budskapet förmedlas även om felen kan försvåra kommunikationen.
  - kan skriva enkel branschspecifik sammanhängande text, som är begriplig och lämplig i sammanhanget. Texten kan vara knapphändig och innehålla upprepade fel vilket kan försvåra läsbarheten.
  - behärskar det branschspecifika och allmänna ordförrådet nöjaktigt. Ett otillräckligt ordförråd begränsar kommunikationen. Brister i förmåga att använda ersättande uttryck förekommer.
  - använder de vanligaste grundkonstruktionerna ensidigt och delvis felaktigt. Inverkan av andra språk är tydlig och delvis störande. (not translated)

•   Tanker Familiarization Course MO22S06-3002 29.01.2024-01.03.2024  0.5 credits  (MT23D-Å) +-
  Competence objectives of the study unit

  STCW- Code: A-V/ 1-1-1
  STCW- Code: B-V/ 1
  STCW-Code: AIII/5
  
  The aim of the Tanker Familiarization Course is that those who intend to start working on a tanker, others than officers or crew having responsibility for cargo transport or handling, will get acquainted with tanker cargoes, cargo handling equipment, cargo shipments and tanker operations.
  After passing the course the student gets a certificate which entitles him/her to apply for an official certificate from the Finnish Maritime Administration.

  Prerequisites

  Vessel Types and Cargo Handling

  Content of the study unit

  • Regulations and application codes
  • Tankers, types, construction, the names of the various parts and equipment
  • Operations on a tanker
  • Loading and discharging, sea transportation, purging, washing and cleaning of tanks, ballast and ballast passage
  • The physical and chemical characteristics of oils, chemicals and gases
  • Cargo characteristics
  • Health hazards, poisonousness, risk of explosion and fire, and risks which are a threat to the marine environment
  • Minimizing the risks and risk factors, risk of explosion and fire and poisonousness, and protection of the marine environment
  • Safety appliances and equipment and personal protection
  • Emergency measures

  Further information

  Basic Training for Oil and Chemical Tanker Cargo Operations
  
  
  The syllabus of the course is designed to meet the requirement of mandatory minimum training as defined in table A-V/1-1-1 of the Seafarers’ Training, Certification and Watchkeeping (STCW) Code. The course has comprised 24 hours of instruction and practical firefighting training.

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  29.01.2024 - 01.03.2024

  Enrollment date range

  02.12.2023 - 28.01.2024

  • 0.5 credits

  Group(s)

  • MT23D-Å

  Teachers and responsibilities

  Tony Karlsson

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Tanker Familiarization Course MO20S06GMC-3002 10.10.2023-30.12.2023  0.5 credits +-
  Competence objectives of the study unit

  STCW- Code: A-V/ 1-1-1
  STCW- Code: B-V/ 1
  STCW-Code: AIII/5
  
  The aim of the Tanker Familiarization Course is that those who intend to start working on a tanker, others than officers or crew having responsibility for cargo transport or handling, will get acquainted with tanker cargoes, cargo handling equipment, cargo shipments and tanker operations.
  After passing the course the student gets a certificate which entitles him/her to apply for an official certificate from the Finnish Maritime Administration.

  Prerequisites

  Vessel Types and Cargo Handling

  Content of the study unit

  • Regulations and application codes
  • Tankers, types, construction, the names of the various parts and equipment
  • Operations on a tanker
  • Loading and discharging, sea transportation, purging, washing and cleaning of tanks, ballast and ballast passage
  • The physical and chemical characteristics of oils, chemicals and gases
  • Cargo characteristics
  • Health hazards, poisonousness, risk of explosion and fire, and risks which are a threat to the marine environment
  • Minimizing the risks and risk factors, risk of explosion and fire and poisonousness, and protection of the marine environment
  • Safety appliances and equipment and personal protection
  • Emergency measures

  ---

  Person(s) in charge

  Tony Karlsson

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  10.10.2023 - 30.12.2023

  Enrollment date range

  10.09.2023 - 09.10.2023

  • 0.5 credits

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Campus

  Åbo, Hertig Johans parkgata 21

  Assessment scale

  H-5

•   Technical Drawings MO22O301-3001 09.10.2023-20.11.2023  3 credits  (MT22D-Å) +-
  Competence objectives of the study unit

  STCW-Code:Table A-III/1
  Students
  are expectes to be able to read drawings and schematics that occur on board the ship as well as be able to make simple drawings.

  Prerequisites

  None

  Content of the study unit

  • Drawing format and scales
  • Lines
  • Views and sections
  • Dimensions
  • Markings, material designations, surface designations and welding designations
  • Tolerances and fits (fittings)
  • Isometric projection
  • Reading of drawings

  ---

  Person(s) in charge

  Kaj Rintanen

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  09.10.2023 - 20.11.2023

  Enrollment date range

  15.06.2023 - 08.10.2023

  • 3 credits

  Group(s)

  • MT22D-Å

  Teachers and responsibilities

  Kaj Rintanen

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Terrestrial Navigation and Collision Regulations MO22S02-3002 06.11.2023-10.12.2023  1.5 credits  (MT23D-Å) +-
  Competence objectives of the study unit

  STCW- Code: Table A-II/1
  The student
  • has the skills in navigation and seamanship required for the competency for functioning as a look-out on the bridge.
  • knows how to use the International Code of Signals.

  Prerequisites

  None

  Content of the study unit

  The student knows
  • nautical charts, their characteristics and symbols.
  • the buoyage system, coordinate system, conversion of courses and easier bearings in connection with chart work.
  • the deviation and variation of a magnetic compass
  • the International Code of Signals
  • visual signalling

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  06.11.2023 - 10.12.2023

  Enrollment date range

  15.06.2023 - 05.11.2023

  • 1.5 credits

  Group(s)

  • MT23D-Å

  Teachers and responsibilities

  Tony Karlsson

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Terrestrial Navigation and Collision Regulations MO20S02GMC-3002 10.10.2023-30.12.2023  1.5 credits +-
  Competence objectives of the study unit

  STCW- Code: Table A-II/1
  The student
  • has the skills in navigation and seamanship required for the competency for functioning as a look-out on the bridge.
  • knows how to use the International Code of Signals.

  Prerequisites

  None

  Content of the study unit

  The student knows
  • nautical charts, their characteristics and symbols.
  • the buoyage system, coordinate system, conversion of courses and easier bearings in connection with chart work.
  • the deviation and variation of a magnetic compass
  • the International Code of Signals
  • visual signalling

  ---

  Person(s) in charge

  Tony Karlsson

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  10.10.2023 - 30.12.2023

  Enrollment date range

  10.09.2023 - 09.10.2023

  • 1.5 credits

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Campus

  Åbo, Hertig Johans parkgata 21

  Assessment scale

  H-5

•   Thermodynamics MO22M106-3001 09.10.2023-31.12.2023  4 credits  (MT21D-Å) +-
  Competence objectives of the study unit

  STCW- Code: Table A-III/2
  
  The student:
  • can design features, and operative mechanism of the marine steam turbines, marine gas turbines and marine steam boilers and associated auxiliaries:
  • has theoretical knowledge of thermodynamics and heat transmission
  • has theoretical knowledge of heat cycle, thermal efficiency and heat balances
  • has theoretical knowledge of refigerators and refigerator cycle

  Prerequisites

  Operational level studies

  Content of the study unit

  • thermodynamics
  • heat transmission
  • heat balances
  • refigerators
  • heat and refigerator cycles

  ---

  Person(s) in charge

  Kaj Rintanen

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  09.10.2023 - 31.12.2023

  Enrollment date range

  15.06.2023 - 08.10.2023

  • 4 credits

  Group(s)

  • MT21D-Å

  Teachers and responsibilities

  Esa Lapela

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Trim, Stability and Stress MO22O401-3001 18.09.2023-06.11.2023  1.5 credits  (MT22D-Å) +-
  Competence objectives of the study unit

  STCW- Code: Table AIII/2
  
  The student:
  • has understanding of fundamental principles of ship construction and the theories and factors affecting trim and stability and measures necessary to preserve trim and stability
  • has knowledge of the effect on trim and stability of a ship in the event of damage to, and consequent flooding of, a compartment and countermeasures to be taken
  • has knowledge of IMO recommendations concerning ship stability

  Prerequisites

  Stability 1

  Content of the study unit

  • Control trim, stability and stress

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  18.09.2023 - 06.11.2023

  Enrollment date range

  15.06.2023 - 17.09.2023

  • 1.5 credits

  Group(s)

  • MT22D-Å

  Teachers and responsibilities

  Petteri Niittymäki

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Trim, Stability and Stress 2+1,0 MO22M401-3001 22.10.2023-27.11.2023  1.5 credits  (MT21D-Å) +-
  Competence objectives of the study unit

  På svenska
  STCW- Code: Table AIII/2
  
  The student:
  • has understanding of fundamental principles of ship construction and the theories and factors affecting trim and stability and measures necessary to preserve trim and stability
  • has knowledge of the effect on trim and stability of a ship in the event of damage to, and consequent flooding of, a compartment and countermeasures to be taken
  • has knowledge of IMO recommendations concerning ship stability

  Prerequisites

  Stability 1

  Content of the study unit

  • Control trim, stability and stress

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  22.10.2023 - 27.11.2023

  Enrollment date range

  15.06.2023 - 31.07.2023

  • 1.5 credits

  Group(s)

  • MT21D-Å

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Ventilation, Plumbing and Refrigeration MO22O106-3001 15.01.2024-19.02.2024  1.5 credits  (MT22D-Å) +-
  Competence objectives of the study unit

  STCW-Code:Table A-III/1
  Students:
  • are expected to have basic knowledge of vessel’s cooling- and plumbing systems

  Prerequisites

  None

  Content of the study unit

  • Cooling applications
  • Cooling process
  • Basic reefer cargo handling
  • Thermodynamic bases of compressor cooling plants
  • Compressor refrigeration systems components
  • Examples of compressor cooling plants
  • Refrigerants/Coolants
  • Condition monitoring
  • Troubleshooting
  • Routine maintenance
  • Safety and environmental aspects when working with refrigeration plants
  • Function of the ship's plumbing system, components operation and maintenance

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  15.01.2024 - 19.02.2024

  Enrollment date range

  01.12.2023 - 14.01.2024

  • 1.5 credits

  Group(s)

  • MT22D-Å

  Teachers and responsibilities

  Bernt Bergman

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Watchkeeping Duties, Engine MO22S10-3002 23.10.2023-27.11.2023  1 credits  (MT23D-Å) +-
  Competence objectives of the study unit

  STCW Code Section A-III/4 and A-III/5, column 4
  The student must be familiar with the watchkeeping routines in accordance with the STCW Convention and understand their significance when it comes to good and safe seamanship and minimized environmental effects. Furthermore, the student must be able to understand and use the correct terms referring to the different parts of the engine room and its general organization.

  Prerequisites

  None

  Content of the study unit

  STCW Code Section A-III/4 and A-III/5 with reference to the duties of a engine room watch

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  23.10.2023 - 27.11.2023

  Enrollment date range

  15.06.2023 - 22.10.2023

  • 1 credits

  Group(s)

  • MT23D-Å

  Teachers and responsibilities

  Thomas Lundberg

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5

•   Watchkeeping Duties, Engine MO21S21GMC-3002 10.10.2023-30.12.2023  1.5 credits +-
  Competence objectives of the study unit

  STCW Code Section A-III/4 A-III/5
  The student must be familiar with the watchkeeping routines in accordance with the STCW Convention and understand their significance when it comes to good and safe seamanship and minimized environmental effects. Furthermore, the student must be able to understand and use the correct terms referring to the different parts of the engine room and its general organization.

  Prerequisites

  None

  Content of the study unit

  STCW Code Section A-III/4 and A-III/5 with reference to the duties of a engine room watch

  ---

  Person(s) in charge

  Tony Karlsson

  Mode of delivery

  Face-to-face

  Teaching language

  Timing

  10.10.2023 - 30.12.2023

  Enrollment date range

  10.09.2023 - 09.10.2023

  • 1.5 credits

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Campus

  Åbo, Hertig Johans parkgata 21

  Assessment scale

  H-5

•   Workshop Exercises MO22O307-3001 22.01.2024-08.03.2024  1.5 credits  (MT22D-Å, ...) +-
  Competence objectives of the study unit

  STCW-Code:Table A-III/1
  Students are:
  • expected to be able to complete basic repairs, manufacturing and measurement methods used in the workshop.

  Prerequisites

  Material science
  Technical drawing

  Content of the study unit

  • Turning: Tolerances, fits, threads and cones
  • Milling: Keyways/ Core grooves and nuts
  • Welding: Electrode, Gas, TIG and MIG

  ---

  Mode of delivery

  Face-to-face

  Teaching language

  English

  Timing

  22.01.2024 - 08.03.2024

  Enrollment date range

  01.12.2023 - 21.01.2024

  • 1.5 credits

  Group(s)

  • MT22D-Å
  • MT21D-Å
  • MT20D-Å

  Teachers and responsibilities

  Bertel Henriksson

  Responsible unit

  Faculty of Technology and Seafaring

  Degree Programme(s)

  Degree Programme in Maritime Technology

  Assessment scale

  H-5