Metal WorksPoäng (1 sp)
Kod: MO22S11
Poäng
1 op
Studieperiodens (kursens) lärandemål
STCW-Code:Table A-III/5
The student
• gets familiar with the most usual cutting and welding methods common onboard modern vessels.
• gets familiar with the safety measures to be taken when performing work with cutting and welding equipment.
• gets to know the most common tools used in metal work, their functioning and areas of use.
• is able to apply occupational safety instructions when using tools and machine tools.
• knows how to perform minor overhaul and maintenance related tasks.
• is able to take environmental aspects into consideration in connection with welding and metal work.
Studieperiodens (kursens) innehåll
• Gas cutting
• Welding using covered electrodes
• MIG/MAG welding
• Tools
• Measuring, marking, cutting, filing, grinding, drilling and threading
• Pipes, pipe parts and packings
Förkunskapskrav
None
Anmälningstid
01.12.2024 - 09.02.2025
Tajmning
10.03.2025 - 02.05.2025
Antal studiepoäng
1 op
Prestationssätt
Kontaktundervisning
Ansvarig enhet
Institutionen för teknik och sjöfart
Undervisningsspråk
- Englanti
Utbildning
- Maritime Technology
Lärare
- Virtual Engine 3
Grupper
-
MT24D-ÅMaritime Technology, h24, daytimeme studies
Lärandemål
STCW-Code:Table A-III/5
The student
• gets familiar with the most usual cutting and welding methods common onboard modern vessels.
• gets familiar with the safety measures to be taken when performing work with cutting and welding equipment.
• gets to know the most common tools used in metal work, their functioning and areas of use.
• is able to apply occupational safety instructions when using tools and machine tools.
• knows how to perform minor overhaul and maintenance related tasks.
• is able to take environmental aspects into consideration in connection with welding and metal work.
Innehåll
• Gas cutting
• Welding using covered electrodes
• MIG/MAG welding
• Tools
• Measuring, marking, cutting, filing, grinding, drilling and threading
• Pipes, pipe parts and packings
Vitsordsskala
H-5
Förkunskapskrav
None
Anmälningstid
02.12.2023 - 11.02.2024
Tajmning
11.03.2024 - 31.05.2024
Antal studiepoäng
1 op
Prestationssätt
Kontaktundervisning
Ansvarig enhet
Institutionen för teknik och sjöfart
Undervisningsspråk
- Englanti
Utbildning
- Maritime Technology
Lärare
- Virtual Deck 2
Grupper
-
MT23D-ÅMaritime Technology, h23, full-time studies
Lärandemål
STCW-Code:Table A-III/5
The student
• gets familiar with the most usual cutting and welding methods common onboard modern vessels.
• gets familiar with the safety measures to be taken when performing work with cutting and welding equipment.
• gets to know the most common tools used in metal work, their functioning and areas of use.
• is able to apply occupational safety instructions when using tools and machine tools.
• knows how to perform minor overhaul and maintenance related tasks.
• is able to take environmental aspects into consideration in connection with welding and metal work.
Innehåll
• Gas cutting
• Welding using covered electrodes
• MIG/MAG welding
• Tools
• Measuring, marking, cutting, filing, grinding, drilling and threading
• Pipes, pipe parts and packings
Vitsordsskala
H-5
Förkunskapskrav
None
Anmälningstid
01.12.2022 - 09.04.2023
Tajmning
10.04.2023 - 03.06.2023
Antal studiepoäng
1 op
Prestationssätt
Kontaktundervisning
Ansvarig enhet
Institutionen för teknik och sjöfart
Undervisningsspråk
- Englanti
Utbildning
- Maritime Technology
Grupper
-
MT22D-ÅMaritime Technology, h22, full-time studies
Lärandemål
STCW-Code:Table A-III/5
The student
• gets familiar with the most usual cutting and welding methods common onboard modern vessels.
• gets familiar with the safety measures to be taken when performing work with cutting and welding equipment.
• gets to know the most common tools used in metal work, their functioning and areas of use.
• is able to apply occupational safety instructions when using tools and machine tools.
• knows how to perform minor overhaul and maintenance related tasks.
• is able to take environmental aspects into consideration in connection with welding and metal work.
Innehåll
• Gas cutting
• Welding using covered electrodes
• MIG/MAG welding
• Tools
• Measuring, marking, cutting, filing, grinding, drilling and threading
• Pipes, pipe parts and packings
Vitsordsskala
H-5
Förkunskapskrav
None