Programmable ControllersLaajuus (3 cr)
Code: ELA22GY03
Credits
3 op
Objective
The student:
- understands the basics of logic algebra
- understands the structure and functionality of programmable controllers
- manages the basics of PLC programming
- manages basic selection of control equipment
Content
- automation and control technology
- processes and their control
- digital sensors
- logical algebra
- construction and function of control system equipment
- PLC programming
- control system project.
Qualifications
-
Assessment criteria, satisfactory (1)
Knows the relation between logic algebra and programmable controllers
Knows the basic principles
Knows the principles of PLC programming
Knows the principles of control equipment selection
Assessment criteria, good (3)
Is able to derive and simplify basic logic functions
Is able to specify the basic requirements for control equipment
Is able to write PLC programs for simple applications
Is able to select control equipment for simple applications
Assessment criteria, excellent (5)
Is able to derive and simplify complex logic functions
Is able to design and configure basic control equipment
Is able to write PLC programs for demanding applications
Is able to select control equipment for demanding applications
Materials
Course compendium
Additional material.
Enrollment
15.06.2024 - 27.04.2025
Timing
09.04.2025 - 23.04.2025
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology and Seafaring
Teaching languages
- Svenska
Degree programmes
- Degree Programme in Electrical Engineering and Automation
Teachers
- Hans Lindén
Teacher in charge
Matts Nickull
Groups
-
ÖH24FLEXINGÖppna YH, Flexibelt till Ingenjör
Objective
The student:
- understands the basics of logic algebra
- understands the structure and functionality of programmable controllers
- manages the basics of PLC programming
- manages basic selection of control equipment
Content
- automation and control technology
- processes and their control
- digital sensors
- logical algebra
- construction and function of control system equipment
- PLC programming
- control system project.
Materials
Course compendium
Additional material.
Evaluation scale
H-5
Assessment criteria, satisfactory (1)
Knows the relation between logic algebra and programmable controllers
Knows the basic principles
Knows the principles of PLC programming
Knows the principles of control equipment selection
Assessment criteria, good (3)
Is able to derive and simplify basic logic functions
Is able to specify the basic requirements for control equipment
Is able to write PLC programs for simple applications
Is able to select control equipment for simple applications
Assessment criteria, excellent (5)
Is able to derive and simplify complex logic functions
Is able to design and configure basic control equipment
Is able to write PLC programs for demanding applications
Is able to select control equipment for demanding applications
Qualifications
-
Enrollment
15.06.2024 - 27.10.2024
Timing
28.10.2024 - 22.12.2024
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology and Seafaring
Campus
Vasa, Wolffskavägen 33
Teaching languages
- Svenska
Degree programmes
- Degree Programme in Electrical Engineering and Automation
Teachers
- Hans Lindén
Teacher in charge
Ronnie Sundsten
Scheduling groups
- ELA24-Y1 (Size: 40. Open UAS: 0.)
- ELA24-S1 (Size: 40. Open UAS: 0.)
- ELA24-Y2 (Size: 40. Open UAS: 0.)
- ELA24-S2 (Size: 40. Open UAS: 0.)
Groups
-
ELA24D-VIngenjör (YH), el- och automationsteknik, 2024, dagstudier
Small groups
- ELA24-Y1
- ELA24-S1
- ELA24-Y2
- ELA24-S2
Objective
The student:
- understands the basics of logic algebra
- understands the structure and functionality of programmable controllers
- manages the basics of PLC programming
- manages basic selection of control equipment
Content
- automation and control technology
- processes and their control
- digital sensors
- logical algebra
- construction and function of control system equipment
- PLC programming
- control system project.
Location and time
28.10.2024 - 20.12.2024
Materials
Compendium
Supplementary material.
Recommended additional reading:
Haag Bengt, Industriell systemteknik
Bolton W, Programmable Logic Controllers
Teaching methods
Lectures
Exercises/Project work
Self studies
Exam schedules
The exam is arranged week 47.
Completion alternatives
Written exam and project report
Student workload
A total of 81 hours, of which lectures / exam 14 hours (weeks 36 - 39) and project work in lab 24 hours (weeks 46 - 50).
Evaluation scale
H-5
Assessment criteria, satisfactory (1)
Knows the relation between logic algebra and programmable controllers
Knows the basic principles
Knows the principles of PLC programming
Knows the principles of control equipment selection
Assessment criteria, good (3)
Is able to derive and simplify basic logic functions
Is able to specify the basic requirements for control equipment
Is able to write PLC programs for simple applications
Is able to select control equipment for simple applications
Assessment criteria, excellent (5)
Is able to derive and simplify complex logic functions
Is able to design and configure basic control equipment
Is able to write PLC programs for demanding applications
Is able to select control equipment for demanding applications
Assessment methods and criteria
Written exam (30 % of course grade) and project work (70 %).
For course grade: At least 33.3 % in the exam (maximum three attempts) and approved project work / report (possibility to raise the grade once).
Assessment criteria, fail (0)
Less than 33.3 % of the total score.
Assessment criteria, satisfactory (1-2)
Grade 1: 33.3 % - 47.2 % of the total score.
Grade 2: 47.3 % - 61.1 % of the total score.
Assessment criteria, good (3-4)
Grade 3: 61.2 % - 74.9 % of the total score.
Grade 4: 75.0 % - 88.8 % of the total score.
Assessment criteria, excellent (5)
More than 88.8 % of the total score.
Qualifications
-
Enrollment
15.06.2024 - 27.10.2024
Timing
28.10.2024 - 22.12.2024
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology and Seafaring
Campus
Vasa, Wolffskavägen 33
Teaching languages
- Svenska
Degree programmes
- Degree Programme in Electrical Engineering and Automation
Teachers
- Hans Lindén
Teacher in charge
Kaj Wikman
Groups
-
UIT24D-VIngenjör (YH), informationsteknik, 2024
Objective
The student:
- understands the basics of logic algebra
- understands the structure and functionality of programmable controllers
- manages the basics of PLC programming
- manages basic selection of control equipment
Content
- automation and control technology
- processes and their control
- digital sensors
- logical algebra
- construction and function of control system equipment
- PLC programming
- control system project.
Location and time
28.10.2024- 20.12.2024
Materials
Compendium
Supplementary material.
Recommended additional reading:
Haag Bengt, Industriell systemteknik
Bolton W, Programmable Logic Controllers
Teaching methods
Lectures
Exercises/Project work
Self studies
Exam schedules
The exam is arranged week 47.
Completion alternatives
Written exam and project report
Student workload
A total of 81 hours, of which lectures / exam 14 hours (weeks 36 - 39) and project work in lab 24 hours (weeks 46 - 50).
Evaluation scale
H-5
Assessment criteria, satisfactory (1)
Knows the relation between logic algebra and programmable controllers
Knows the basic principles
Knows the principles of PLC programming
Knows the principles of control equipment selection
Assessment criteria, good (3)
Is able to derive and simplify basic logic functions
Is able to specify the basic requirements for control equipment
Is able to write PLC programs for simple applications
Is able to select control equipment for simple applications
Assessment criteria, excellent (5)
Is able to derive and simplify complex logic functions
Is able to design and configure basic control equipment
Is able to write PLC programs for demanding applications
Is able to select control equipment for demanding applications
Assessment methods and criteria
Written exam (30 % of course grade) and project work (70 %).
For course grade: At least 33.3 % in the exam (maximum three attempts) and approved project work / report (possibility to raise the grade once).
Assessment criteria, fail (0)
Less than 33.3 % of the total score.
Assessment criteria, satisfactory (1-2)
Grade 1: 33.3 % - 47.2 % of the total score.
Grade 2: 47.3 % - 61.1 % of the total score.
Assessment criteria, good (3-4)
Grade 3: 61.2 % - 74.9 % of the total score.
Grade 4: 75.0 % - 88.8 % of the total score.
Assessment criteria, excellent (5)
More than 88.8 % of the total score.
Qualifications
-
Enrollment
01.12.2023 - 07.04.2024
Timing
02.04.2024 - 16.04.2024
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology and Seafaring
Teaching languages
- Svenska
Degree programmes
- Degree Programme in Electrical Engineering and Automation
Teachers
- Hans Lindén
Teacher in charge
Matts Nickull
Groups
-
ÖH23FLEXINGÖppna YH, Flexibelt till Ingenjör
Objective
The student:
- understands the basics of logic algebra
- understands the structure and functionality of programmable controllers
- manages the basics of PLC programming
- manages basic selection of control equipment
Content
- automation and control technology
- processes and their control
- digital sensors
- logical algebra
- construction and function of control system equipment
- PLC programming
- control system project.
Evaluation scale
H-5
Assessment criteria, satisfactory (1)
Knows the relation between logic algebra and programmable controllers
Knows the basic principles
Knows the principles of PLC programming
Knows the principles of control equipment selection
Assessment criteria, good (3)
Is able to derive and simplify basic logic functions
Is able to specify the basic requirements for control equipment
Is able to write PLC programs for simple applications
Is able to select control equipment for simple applications
Assessment criteria, excellent (5)
Is able to derive and simplify complex logic functions
Is able to design and configure basic control equipment
Is able to write PLC programs for demanding applications
Is able to select control equipment for demanding applications
Qualifications
-
Enrollment
15.06.2023 - 29.10.2023
Timing
30.10.2023 - 17.12.2023
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology and Seafaring
Campus
Vasa, Wolffskavägen 33
Teaching languages
- Svenska
Degree programmes
- Degree Programme in Electrical Engineering and Automation
Teachers
- Matts Nickull
Teacher in charge
Ronnie Sundsten
Scheduling groups
- ELA23-S1 (Size: 30. Open UAS: 0.)
- ELA23-S2 (Size: 30. Open UAS: 0.)
- ELA23-Y1 (Size: 30. Open UAS: 0.)
- ELA23-Y2 (Size: 30. Open UAS: 0.)
- UIT23-IT (Size: 30. Open UAS: 0.)
Groups
-
ÖH23UIT-LED-VÖppna YH, Informationsteknik, ledstudier
-
ELA23D-VIngenjör (YH), el- och automationsteknik, 2023, dagstudier
-
ÖH23ELA-LED-VÖppna YH, el-och automationsteknik ledstudier
-
UIT23D-VIngenjör (YH), informationsteknik
Small groups
- ELA23-S1
- ELA23-S2
- ELA23-Y1
- ELA23-Y2
- UIT23-IT
Objective
The student:
- understands the basics of logic algebra
- understands the structure and functionality of programmable controllers
- manages the basics of PLC programming
- manages basic selection of control equipment
Content
- automation and control technology
- processes and their control
- digital sensors
- logical algebra
- construction and function of control system equipment
- PLC programming
- control system project.
Location and time
28.10.2024- 20.12.2024
Materials
Compendium
Supplementary material.
Recommended additional reading:
Haag Bengt, Industriell systemteknik
Bolton W, Programmable Logic Controllers
Teaching methods
Lectures
Exercises/Project work
Self studies
Exam schedules
The exam is arranged week 47.
Completion alternatives
Written exam and project report
Student workload
A total of 81 hours, of which lectures / exam 14 hours (weeks 36 - 39) and project work in lab 24 hours (weeks 46 - 50).
Evaluation scale
H-5
Assessment criteria, satisfactory (1)
Knows the relation between logic algebra and programmable controllers
Knows the basic principles
Knows the principles of PLC programming
Knows the principles of control equipment selection
Assessment criteria, good (3)
Is able to derive and simplify basic logic functions
Is able to specify the basic requirements for control equipment
Is able to write PLC programs for simple applications
Is able to select control equipment for simple applications
Assessment criteria, excellent (5)
Is able to derive and simplify complex logic functions
Is able to design and configure basic control equipment
Is able to write PLC programs for demanding applications
Is able to select control equipment for demanding applications
Assessment methods and criteria
Written exam (30 % of course grade) and project work (70 %).
For course grade: At least 33.3 % in the exam (maximum three attempts) and approved project work / report (possibility to raise the grade once).
Assessment criteria, fail (0)
Less than 33.3 % of the total score.
Assessment criteria, satisfactory (1-2)
Grade 1: 33.3 % - 47.2 % of the total score.
Grade 2: 47.3 % - 61.1 % of the total score.
Assessment criteria, good (3-4)
Grade 3: 61.2 % - 74.9 % of the total score.
Grade 4: 75.0 % - 88.8 % of the total score.
Assessment criteria, excellent (5)
More than 88.8 % of the total score.
Qualifications
-
Enrollment
01.12.2022 - 23.04.2023
Timing
05.04.2023 - 19.04.2023
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology and Seafaring
Teaching languages
- Svenska
Degree programmes
- Degree Programme in Electrical Engineering and Automation
Teachers
- Hans Lindén
Teacher in charge
Matts Nickull
Groups
-
ÖH22FLEXINGÖppna YH, Flexibelt till Ingenjör
Objective
The student:
- understands the basics of logic algebra
- understands the structure and functionality of programmable controllers
- manages the basics of PLC programming
- manages basic selection of control equipment
Content
- automation and control technology
- processes and their control
- digital sensors
- logical algebra
- construction and function of control system equipment
- PLC programming
- control system project.
Evaluation scale
H-5
Assessment criteria, satisfactory (1)
Knows the relation between logic algebra and programmable controllers
Knows the basic principles
Knows the principles of PLC programming
Knows the principles of control equipment selection
Assessment criteria, good (3)
Is able to derive and simplify basic logic functions
Is able to specify the basic requirements for control equipment
Is able to write PLC programs for simple applications
Is able to select control equipment for simple applications
Assessment criteria, excellent (5)
Is able to derive and simplify complex logic functions
Is able to design and configure basic control equipment
Is able to write PLC programs for demanding applications
Is able to select control equipment for demanding applications
Qualifications
-