Machine Elements 1Laajuus (3 cr)
Code: MAP22KT04
Credits
3 op
Objective
After completing the course, the student is expected to:
- be able to define, identify and describe basic machine elements
- be able to perform dimensioning calculations for certain basic machine elements used in mechanical designs.
- be able to compare and critically evaluate machine elements in order to understand the technical and economic connection in design choices.
Content
- Welding joints
- Screw connections
- Rivets
- Wedging
- Shrink and press fits
- Clamping joints
- Spline joints
- Tapered joints
- Expandable and compressible joints
Qualifications
Strenght of Materials 1
Assessment criteria, satisfactory (1)
Can calculate and dimension simple weld joints. Understands the difference between static and dynamically loaded joints.
Understands screw mechanics and load diagrams. Can design simple screw joints using thumb rules.
Understands the tension picture in shrinkage and compression joints.
Know the principles of various machine elements.
Assessment criteria, good (3)
Can apply the standards for statically loaded and for dynamically loaded welded joints in the calculation of simple welded structures.
Can design and calculate simple screw and rivet joints.
Can design simple shrinkage and press fits.
Understands the possibilities and limitations of machine elements in designs.
Assessment criteria, excellent (5)
Can consider the impact of the service life and the impact of the load collector on dynamically loaded weld joints.
Can independently design demanding screws and rivets, and can use standards for dimensioning.
Can calculate shrinkage and press fits, and has knowledge of the materials and the impact of the surfaces.
Understands the technical and economic connections that the choice of machine elements entails.
Enrollment
15.06.2024 - 20.10.2024
Timing
21.10.2024 - 22.12.2024
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology and Seafaring
Campus
Vasa, Wolffskavägen 33
Teaching languages
- Svenska
Degree programmes
- Degree Programme in Mechanical and Production Engineering
Teachers
- Leif Backlund
Teacher in charge
Kaj Rintanen
Scheduling groups
- MAP23-K (Size: 40. Open UAS: 0.)
- MAP23-D (Size: 40. Open UAS: 0.)
- MAP23-B (Size: 40. Open UAS: 0.)
Groups
-
MAP23D-VIngenjör (YH), maskin- och produktionsteknik, 2023 dagstudier
Small groups
- MAP23-K
- MAP23-D
- MAP23-B
Objective
After completing the course, the student is expected to:
- be able to define, identify and describe basic machine elements
- be able to perform dimensioning calculations for certain basic machine elements used in mechanical designs.
- be able to compare and critically evaluate machine elements in order to understand the technical and economic connection in design choices.
Content
- Welding joints
- Screw connections
- Rivets
- Wedging
- Shrink and press fits
- Clamping joints
- Spline joints
- Tapered joints
- Expandable and compressible joints
Evaluation scale
H-5
Assessment criteria, satisfactory (1)
Can calculate and dimension simple weld joints. Understands the difference between static and dynamically loaded joints.
Understands screw mechanics and load diagrams. Can design simple screw joints using thumb rules.
Understands the tension picture in shrinkage and compression joints.
Know the principles of various machine elements.
Assessment criteria, good (3)
Can apply the standards for statically loaded and for dynamically loaded welded joints in the calculation of simple welded structures.
Can design and calculate simple screw and rivet joints.
Can design simple shrinkage and press fits.
Understands the possibilities and limitations of machine elements in designs.
Assessment criteria, excellent (5)
Can consider the impact of the service life and the impact of the load collector on dynamically loaded weld joints.
Can independently design demanding screws and rivets, and can use standards for dimensioning.
Can calculate shrinkage and press fits, and has knowledge of the materials and the impact of the surfaces.
Understands the technical and economic connections that the choice of machine elements entails.
Qualifications
Strenght of Materials 1
Enrollment
15.06.2024 - 20.10.2024
Timing
21.10.2024 - 22.12.2024
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology and Seafaring
Campus
Vasa, Wolffskavägen 33
Teaching languages
- Svenska
Degree programmes
- Degree Programme in Industrial Management
Teachers
- Leif Backlund
Teacher in charge
Niklas Kallenberg
Groups
-
PRE23D-VIngenjör (YH), produktionsekonomi, 2023 dagstudier
Objective
After completing the course, the student is expected to:
- be able to define, identify and describe basic machine elements
- be able to perform dimensioning calculations for certain basic machine elements used in mechanical designs.
- be able to compare and critically evaluate machine elements in order to understand the technical and economic connection in design choices.
Content
- Welding joints
- Screw connections
- Rivets
- Wedging
- Shrink and press fits
- Clamping joints
- Spline joints
- Tapered joints
- Expandable and compressible joints
Evaluation scale
H-5
Assessment criteria, satisfactory (1)
Can calculate and dimension simple weld joints. Understands the difference between static and dynamically loaded joints.
Understands screw mechanics and load diagrams. Can design simple screw joints using thumb rules.
Understands the tension picture in shrinkage and compression joints.
Know the principles of various machine elements.
Assessment criteria, good (3)
Can apply the standards for statically loaded and for dynamically loaded welded joints in the calculation of simple welded structures.
Can design and calculate simple screw and rivet joints.
Can design simple shrinkage and press fits.
Understands the possibilities and limitations of machine elements in designs.
Assessment criteria, excellent (5)
Can consider the impact of the service life and the impact of the load collector on dynamically loaded weld joints.
Can independently design demanding screws and rivets, and can use standards for dimensioning.
Can calculate shrinkage and press fits, and has knowledge of the materials and the impact of the surfaces.
Understands the technical and economic connections that the choice of machine elements entails.
Qualifications
Strenght of Materials 1
Enrollment
15.06.2023 - 08.10.2023
Timing
09.10.2023 - 17.12.2023
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology and Seafaring
Campus
Vasa, Wolffskavägen 33
Teaching languages
- Svenska
Degree programmes
- Degree Programme in Industrial Management
Teachers
- Leif Backlund
Groups
-
PRE22D-VIngenjör (YH), produktionsekonomi, 2022 dagstudier
Objective
After completing the course, the student is expected to:
- be able to define, identify and describe basic machine elements
- be able to perform dimensioning calculations for certain basic machine elements used in mechanical designs.
- be able to compare and critically evaluate machine elements in order to understand the technical and economic connection in design choices.
Content
- Welding joints
- Screw connections
- Rivets
- Wedging
- Shrink and press fits
- Clamping joints
- Spline joints
- Tapered joints
- Expandable and compressible joints
Evaluation scale
H-5
Assessment criteria, satisfactory (1)
Can calculate and dimension simple weld joints. Understands the difference between static and dynamically loaded joints.
Understands screw mechanics and load diagrams. Can design simple screw joints using thumb rules.
Understands the tension picture in shrinkage and compression joints.
Know the principles of various machine elements.
Assessment criteria, good (3)
Can apply the standards for statically loaded and for dynamically loaded welded joints in the calculation of simple welded structures.
Can design and calculate simple screw and rivet joints.
Can design simple shrinkage and press fits.
Understands the possibilities and limitations of machine elements in designs.
Assessment criteria, excellent (5)
Can consider the impact of the service life and the impact of the load collector on dynamically loaded weld joints.
Can independently design demanding screws and rivets, and can use standards for dimensioning.
Can calculate shrinkage and press fits, and has knowledge of the materials and the impact of the surfaces.
Understands the technical and economic connections that the choice of machine elements entails.
Qualifications
Strenght of Materials 1
Enrollment
15.06.2023 - 08.10.2023
Timing
09.10.2023 - 17.12.2023
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology and Seafaring
Campus
Vasa, Wolffskavägen 33
Teaching languages
- Svenska
Teachers
- Leif Backlund
Teacher in charge
Kaj Rintanen
Groups
-
MAP22D-VIngenjör (YH), maskin- och produktionsteknik, 2022 dagstudier
Objective
After completing the course, the student is expected to:
- be able to define, identify and describe basic machine elements
- be able to perform dimensioning calculations for certain basic machine elements used in mechanical designs.
- be able to compare and critically evaluate machine elements in order to understand the technical and economic connection in design choices.
Content
- Welding joints
- Screw connections
- Rivets
- Wedging
- Shrink and press fits
- Clamping joints
- Spline joints
- Tapered joints
- Expandable and compressible joints
Evaluation scale
H-5
Assessment criteria, satisfactory (1)
Can calculate and dimension simple weld joints. Understands the difference between static and dynamically loaded joints.
Understands screw mechanics and load diagrams. Can design simple screw joints using thumb rules.
Understands the tension picture in shrinkage and compression joints.
Know the principles of various machine elements.
Assessment criteria, good (3)
Can apply the standards for statically loaded and for dynamically loaded welded joints in the calculation of simple welded structures.
Can design and calculate simple screw and rivet joints.
Can design simple shrinkage and press fits.
Understands the possibilities and limitations of machine elements in designs.
Assessment criteria, excellent (5)
Can consider the impact of the service life and the impact of the load collector on dynamically loaded weld joints.
Can independently design demanding screws and rivets, and can use standards for dimensioning.
Can calculate shrinkage and press fits, and has knowledge of the materials and the impact of the surfaces.
Understands the technical and economic connections that the choice of machine elements entails.
Qualifications
Strenght of Materials 1