Basics in Technical DrawingLaajuus (3 cr)
Code: ELA22GY16
Credits
3 op
Objective
The student is able to:
- describe basic commands and functions in AutoCAD
- choose different methods to optimize the accuracy of drawings
- use existing methods to create descriptive and easily edited drawings
- use most drawing commands in AutoCAD
- use the drawing aids available in AutoCAD
- create drawings with different line types and colors
- structure drawings in different layers
- choose method and aids for producing CAD-based drawings
- choose a method for finishing and correcting existing diagrams and drawings
Content
Technology and basic functions for mainly AutoCAD and CADS.
Basic commands and functions to provide descriptive and accurate drawings in various technical areas, taking into account the requirements and standards in each industry.
Various options for finishing and correcting existing schedules and drawings.
Qualifications
No prerequisites.
Assessment criteria, approved/failed
Approved exercises according to instructions given in the course in Moodle and approved exam with control questions.
Materials
Drawing programs' auxiliary functions and the course coordinator's compendiums.
Enrollment
15.06.2024 - 16.02.2025
Timing
29.01.2025 - 12.02.2025
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology and Seafaring
Teaching languages
- Svenska
Degree programmes
- Degree Programme in Electrical Engineering and Automation
Teachers
- Roger Mäntylä
Teacher in charge
Matts Nickull
Groups
-
ÖH24FLEXINGÖppna YH, Flexibelt till Ingenjör
Objective
The student is able to:
- describe basic commands and functions in AutoCAD
- choose different methods to optimize the accuracy of drawings
- use existing methods to create descriptive and easily edited drawings
- use most drawing commands in AutoCAD
- use the drawing aids available in AutoCAD
- create drawings with different line types and colors
- structure drawings in different layers
- choose method and aids for producing CAD-based drawings
- choose a method for finishing and correcting existing diagrams and drawings
Content
Technology and basic functions for mainly AutoCAD and CADS.
Basic commands and functions to provide descriptive and accurate drawings in various technical areas, taking into account the requirements and standards in each industry.
Various options for finishing and correcting existing schedules and drawings.
Location and time
weeks. 5-7, Wednesdays 15.00-18:00
Materials
Compendiums and info via Moodle for the course.
Teaching methods
Distance education
Exam schedules
Deadline for submission is given during the course
Completion alternatives
Assessment of assignments.
Student workload
3 cr. containing 3 distance sessions as mentioned above.
Assessment criteria, approved/failed
Passed assignment
Content scheduling
w. 5-7
Evaluation scale
Approved/Rejected
Assessment criteria, approved/failed
Approved exercises according to instructions given in the course in Moodle and approved exam with control questions.
Assessment methods and criteria
Assignment
Qualifications
No prerequisites.
Enrollment
15.06.2024 - 27.10.2024
Timing
28.10.2024 - 15.12.2024
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology and Seafaring
Campus
Vasa, Wolffskavägen 33
Teaching languages
- Svenska
Degree programmes
- Degree Programme in Electrical Engineering and Automation
Teachers
- Kennet Tallgren
Teacher in charge
Ronnie Sundsten
Scheduling groups
- ELA24-Y (Size: 50. Open UAS: 0.)
- ELA24-S (Size: 50. Open UAS: 0.)
Groups
-
ELA24D-VIngenjör (YH), el- och automationsteknik, 2024, dagstudier
Small groups
- ELA24-Y
- ELA24-S
Objective
The student is able to:
- describe basic commands and functions in AutoCAD
- choose different methods to optimize the accuracy of drawings
- use existing methods to create descriptive and easily edited drawings
- use most drawing commands in AutoCAD
- use the drawing aids available in AutoCAD
- create drawings with different line types and colors
- structure drawings in different layers
- choose method and aids for producing CAD-based drawings
- choose a method for finishing and correcting existing diagrams and drawings
Content
Technology and basic functions for mainly AutoCAD and CADS.
Basic commands and functions to provide descriptive and accurate drawings in various technical areas, taking into account the requirements and standards in each industry.
Various options for finishing and correcting existing schedules and drawings.
Evaluation scale
H-5
Assessment criteria, approved/failed
Approved exercises according to instructions given in the course in Moodle and approved exam with control questions.
Qualifications
No prerequisites.
Enrollment
01.12.2023 - 28.01.2024
Timing
23.01.2024 - 06.02.2024
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology and Seafaring
Teaching languages
- Svenska
Degree programmes
- Degree Programme in Electrical Engineering and Automation
Teachers
- Roger Mäntylä
Teacher in charge
Matts Nickull
Groups
-
ÖH23FLEXINGÖppna YH, Flexibelt till Ingenjör
Objective
The student is able to:
- describe basic commands and functions in AutoCAD
- choose different methods to optimize the accuracy of drawings
- use existing methods to create descriptive and easily edited drawings
- use most drawing commands in AutoCAD
- use the drawing aids available in AutoCAD
- create drawings with different line types and colors
- structure drawings in different layers
- choose method and aids for producing CAD-based drawings
- choose a method for finishing and correcting existing diagrams and drawings
Content
Technology and basic functions for mainly AutoCAD and CADS.
Basic commands and functions to provide descriptive and accurate drawings in various technical areas, taking into account the requirements and standards in each industry.
Various options for finishing and correcting existing schedules and drawings.
Location and time
weeks. 4-6, Tuesdays 15.00-18:00
Materials
Compendiums and info via Moodle for the course.
Teaching methods
Distance education
Exam schedules
Deadline for submission is given during the course
Completion alternatives
Assessment of assignments.
Student workload
3 cr. containing 3 distance sessions as mentioned above.
Assessment criteria, approved/failed
Passed assignment
Content scheduling
w. 4-6
Evaluation scale
Approved/Rejected
Assessment criteria, approved/failed
Approved exercises according to instructions given in the course in Moodle and approved exam with control questions.
Assessment methods and criteria
Assignment
Qualifications
No prerequisites.
Enrollment
30.11.2023 - 07.01.2024
Timing
01.01.2024 - 11.02.2024
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology and Seafaring
Campus
Vasa, Wolffskavägen 33
Teaching languages
- Svenska
Degree programmes
- Degree Programme in Electrical Engineering and Automation
Teachers
- Kennet Tallgren
Teacher in charge
Ronnie Sundsten
Scheduling groups
- ELA22-A (Size: 30. Open UAS: 0.)
- ELA22-E (Size: 30. Open UAS: 0.)
- ELA22-K (Size: 30. Open UAS: 0.)
- ELA22-I (Size: 30. Open UAS: 0.)
Groups
-
ELA22D-VIngenjör (YH), el- och automationsteknik, 2022, dagstudier
Small groups
- ELA22-A
- ELA22-E
- ELA22-K
- ELA22-I
Objective
The student is able to:
- describe basic commands and functions in AutoCAD
- choose different methods to optimize the accuracy of drawings
- use existing methods to create descriptive and easily edited drawings
- use most drawing commands in AutoCAD
- use the drawing aids available in AutoCAD
- create drawings with different line types and colors
- structure drawings in different layers
- choose method and aids for producing CAD-based drawings
- choose a method for finishing and correcting existing diagrams and drawings
Content
Technology and basic functions for mainly AutoCAD and CADS.
Basic commands and functions to provide descriptive and accurate drawings in various technical areas, taking into account the requirements and standards in each industry.
Various options for finishing and correcting existing schedules and drawings.
Evaluation scale
H-5
Assessment criteria, approved/failed
Approved exercises according to instructions given in the course in Moodle and approved exam with control questions.
Qualifications
No prerequisites.
Enrollment
15.06.2023 - 22.10.2023
Timing
23.10.2023 - 17.12.2023
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology and Seafaring
Campus
Vasa, Wolffskavägen 33
Teaching languages
- Svenska
Degree programmes
- Degree Programme in Electrical Engineering and Automation
Teachers
- Kennet Tallgren
Teacher in charge
Ronnie Sundsten
Scheduling groups
- ELA23-S (Size: 30. Open UAS: 0.)
- ELA23-Y (Size: 30. Open UAS: 0.)
Groups
-
ELA23D-VIngenjör (YH), el- och automationsteknik, 2023, dagstudier
-
ÖH23ELA-LED-VÖppna YH, el-och automationsteknik ledstudier
Small groups
- ELA23-S
- ELA23-Y
Objective
The student is able to:
- describe basic commands and functions in AutoCAD
- choose different methods to optimize the accuracy of drawings
- use existing methods to create descriptive and easily edited drawings
- use most drawing commands in AutoCAD
- use the drawing aids available in AutoCAD
- create drawings with different line types and colors
- structure drawings in different layers
- choose method and aids for producing CAD-based drawings
- choose a method for finishing and correcting existing diagrams and drawings
Content
Technology and basic functions for mainly AutoCAD and CADS.
Basic commands and functions to provide descriptive and accurate drawings in various technical areas, taking into account the requirements and standards in each industry.
Various options for finishing and correcting existing schedules and drawings.
Location and time
Lessons in class according to the schedule in Peppi.
Materials
Compendiums and info via Moodle for the course.
Teaching methods
Lessons in class and basic exercises at your own pace with the possibility of individual help and settlement of assignments.
Information and study materials are available via Moodle for the course.
Exam schedules
The time for the joint exam and any extra exam is determined in agreement with the students during the course. Lessons in class and laboratory sessions according to the established schedule in Peppi.
Completion alternatives
Assessment of assignments.
Student workload
A total of 80 hours divided into lessons in class, self-study and preparation of exercises.
Assessment criteria, approved/failed
Passed assignment and exam.
Content scheduling
Weeks 43 - 49.
Evaluation scale
Approved/Rejected
Assessment criteria, approved/failed
Approved exercises according to instructions given in the course in Moodle and approved exam with control questions.
Assessment methods and criteria
Assignment and final exam.
Qualifications
No prerequisites.
Enrollment
01.12.2022 - 29.01.2023
Timing
19.01.2023 - 08.02.2023
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology and Seafaring
Teaching languages
- Svenska
Degree programmes
- Degree Programme in Electrical Engineering and Automation
Teachers
- Roger Mäntylä
Teacher in charge
Matts Nickull
Groups
-
ÖH22FLEXINGÖppna YH, Flexibelt till Ingenjör
Objective
The student is able to:
- describe basic commands and functions in AutoCAD
- choose different methods to optimize the accuracy of drawings
- use existing methods to create descriptive and easily edited drawings
- use most drawing commands in AutoCAD
- use the drawing aids available in AutoCAD
- create drawings with different line types and colors
- structure drawings in different layers
- choose method and aids for producing CAD-based drawings
- choose a method for finishing and correcting existing diagrams and drawings
Content
Technology and basic functions for mainly AutoCAD and CADS.
Basic commands and functions to provide descriptive and accurate drawings in various technical areas, taking into account the requirements and standards in each industry.
Various options for finishing and correcting existing schedules and drawings.
Evaluation scale
H-5
Assessment criteria, approved/failed
Approved exercises according to instructions given in the course in Moodle and approved exam with control questions.
Qualifications
No prerequisites.